Tag Archive for slippery nickel PTFE

Beat Friction and Wear with Slippery Nickel PTFE

The problems of friction and wear on metal components can inhibit their efficiency and reduce their lifespan. Conventional lubricants can be harmful to some components, so unfortunately they are not always an option. However, the composite coating of electroless nickel PTFE can solve this problem, as the coating is actually slicker than the best self lubricating materials!

Durable Dry Lubrication with Anti-galling Requirements

Ni-PTFE has fantastic qualities of low friction wear and self lubrication, which make it the perfect choice for sliding wear applications where friction and wear on parts can be a problem.

The hardness of electroless nickel coupled with the low friction release properties of PTFE make it an ideal composite coating for components and assemblies where conventional lubricants are a problem.

The coating of electroless nickel PTFE is created by adding sub micron particles of PTFE to the plating solution, which are then co-deposited with the electroless nickel. This method ensures that an even distribution of the PTFE particles are deposited throughout the plated layer, and can be varied in the solution to give the performance characteristics required depending on what the final plated component will be used for.

Applications of Electroless Nickel PTFE

Electroless nickel PTFE can be used for a wide variety of applications in a range of industries. The coating is often used in the automotive industry, for example, where components including piston rings, valves, injection nozzles, carburetors, and oil pumps benefit from it. When treated with electroless nickel PTFE coatings, these parts contribute to increased fuel management for vehicles, and also demonstrate corrosion resistance, wear resistance, and tribological properties.

Electroless nickel PTFE is often used to coat pistons in the hydraulics industry, as its properties of corrosion and wear resistance are incredibly useful. It is also commonly used in the aerospace industry to coat connectors, again, improving their corrosion resistance and wear properties. When coated with electroless nickel PTFE, cutting tools and guides used in the textile industry show reduced noise and a longer lifespan.

Electroless Nickel with Polytetrafluoreothylene

If you want to beat friction and wear on metal components, electroless nickel PTFE is the perfect solution. Call NiTEC UK on 0845 224 3571, email us at info@nitec-enp.co.uk or visit the contact page on our website to make an inquiry.