Tag Archive for shotblasting services

Everything you need to know about Shot Blasting

shot-blasting-electroless-nickel-plating-nitecShot blasting is a key factor in the fabrication process.  It is essential so that a clean finish can be provided in order for welding to be undertaken.  It also enables a keyed surface to be produced so that paint can be accepted by the prepared façade.

The Process of Shot Blasting

Shot blasting is undertaken by shot being fired or ‘blasted’ directly at steel, yes, the process is all in the name.  The force of the shot being blasted at the surface of the steel displaces dirt and scale, therefore cleaning the steel and preparing it for the welding process.  This is due to the indentations caused by the shot repeatedly hitting the steel surface, creating a rough texture, which is approximately 70 microns deeps.  Due to this abrasion, it enables paint to stick properly and long term to the steel surface, which creates protection and aids longevity to a component part.

Shot Blasting and Electroless Nickel Plating

The shot blasting preparation is often performed prior to the electroless nickel plating process, but for this to happen the surface preparation must be high quality and thorough, which is why shot blasting is used.  To achieve the ultimate final surface finish, chemical cleaning and activation processes, such as aluminium oxide 180-220 grit are used.  By choosing NiTEC UK to undertake your shot blasting and electroless nickel plating solutions, you know that the standards met will be the highest every time.  At NiTEC UK, the stainless steel shot blasting booth has the capacity to take 216m³.  This minimises the particles which settle on the component parts during their shot blasting or heat treatment processes.

Contact Us Today at NiTEC UK

If you or your business are interested in the shot blasting process, electroless nickel plating or heat treatment which may require specialist assistance, then get in touch with NiTEC UK?  A Derbyshire based company, we are leading specialists in the plating industry offering a wide range of well-developed, tried and tested techniques which are high-end as well as also being cost effective.  We have experience of working for many different industries, including the aerospace, medical, army and automotive industries, to name but a few.  We offer our services to the whole of the UK, Germany, France, Brazil and Holland.  Call us today on 0845 224 3571 or alternatively you can email us at info@nitec-enp.co.uk if you need more information.

 

Shotblasting – The Abrasive Protection

shot-blasting-nitec-ukShotblasting is a technological process which enables impurities of metal parts to be removed from a wide variety of surfaces, through the medium of abrasionShotblasting can be used as a preparation method performed before other processes, such as welding, colouring, painting, where imperfections must be eradicated to gain a perfect finish, join or seal.  It can also be used as a method of surface protection.  The end result of a cleaned metal surface depends on multiple characteristics.  These can be examples, such as the mass size of the abrasive particle, its shape, density, coverage of strokes (kg/m²), the particle impactor angle and the particle velocity.

The shotblasting process can be undertaken for multiple reasons – the cleaning, strengthening or polishing of metal.  These processes are used in almost every single industry which uses metal, including that of the aerospace, automotive, construction and transportation.  In order for shotblasting to take place, two technological processes can be undertaken – wheelblasting or airblasting.

Wheelblasting for the Shotblasting Process

Wheelblasting is the direct conversion of electric motor energy into kinetic abrasive energy through the use of a rotating turbine wheel.  Each wheel has a capacity starting from 60kg per minute and maximising at 1200kg per minute.  Companies need wheelblast machines where large parts or great areas have been derusted, descaled, deburred, desanded or if they need cleaning in some way.  Often the way to work out how to choose which process your business needs is based upon the size of the metal part that needs work doing to it – the ease of its transportation is the deciding factor.

Shotblasting and the Airblasting Process

Airblast machines are pneumatically accelerated machines which are air powered, with projected nozzles angled on to the component – the process, quite literally, is all in the name!  Airblasting can occur in two ways, either in a blastroom or a blastcabinet.  If special applications are needed, water mix can be used which is known as wet blasting.  Whether you need airblasting or wet blasting, the blast nozzles can be installed in to unique positions to target problem areas.  They can be operated manually or automatically or even by robots.

Shotblasting at NiTEC UK

Shotblasting at NiTEC can occur for component parts which weigh up to 20 tonnes.  Usually, the shotblasting process is required prior to our electroless nickel plating process, as a surface preparation, in order for you to gain the best finish and your metal components to get the best protection.  The better the abrasive finish from the shotblasting process, the better the electroless nickel plating, the better your component part will work and the longer it will last for you.  Shotblasting is an important process.

Contact Us Today at NiTEC UK

If you or your business are interested in the shotblasting process or electroless nickel plating, then why not get in touch with NiTEC UK?  A Derbyshire based company, we are leading specialists in the plating industry offering a wide range of well-developed, tried and tested techniques which are high-end whilst also being cost effective.  We have experience of working for many different industries, including the aerospace, medical, military and automotive industries, to name but a few.  We offer our services to the whole of the UK, Germany, France, Brazil and Holland.  Call us today on 0845 224 3571 or alternatively you can email us at info@nitec-enp.co.uk

 

Clean, Strengthen and Polish Metal with Chilled Iron Shot-Blasting

shot blasting services

What is shotblasting used for?

Shotblasting is a method which is used to clean, strengthen or polish metal.

This method is used in a variety of industries, including aerospace, automotive, construction, shipbuilding and foundry. Basically, it can be used in any industry that uses metal!

Airblasting

Airblasting is a form of shotblasting that is carried out using a blastroom or blast cabinet. The blast media, for example iron, is pneumatically accelerated by compressed air and projected by nozzles onto the compartment.

The shotblasting media itself can be mixed with water, which is called wet blasting. In wet blasting and air blasting, the nozzles can be installed in fixed positions or they can be operated manually. They can also be operated using an automatic nozzle manipulators or even robots.

Shotblasting facilities at NiTEC

At NiTEC we pride ourselves on using the most technically advanced equipment to achieve the highest quality finish on all our projects. Our shotblasting capabilities include the following.

  • The ability to shot blast components of up to 20 tonnes in weight.
  • The capacity to shot-blast up to a 216m³ components.

If a finer surface finish is required then it is also possible to blast the component with Aluminium Oxide 180-220 grit.

The shot blast booth at NiTEC, used for shotblasting and heat treatment, has a capacity of 216m3 and is made from stainless steel which minimises the particles that settle on the work. We also pride ourselves on our excellent customer service, our fast turnaround times, quality workmanship and competitive rates.

To find out more about about shotblasting and abrasive blast cleaning processes available at NiTEC, please visit the NiTEC website, call us on 0845 224 3571, or email us at info@nitec-enp.co.uk