As experts in electroless nickel plating, NiTEC provide the full spectrum of nickel and phosphorous alloys.
Electroless nickel can be alloyed with between 4 and 14% phosphorous. There are three main types of electroless nickel, which are outlined below.
Low phosphorous electroless nickel coatings
Low phosphorous electroless nickel is alloyed with approximately 4% phosphorous. Electroless nickel coatings of this type are typically very hard, have good corrosion protection in alkaline environments and lowest impact on fatigue. Low phosphorous electroless nickel is best for higher temperatures.
Medium phosphorous electroless nickel coatings
Medium phosphorous electroless nickel is alloyed with between 5 to 9% phosphorous. This is the most common type of electroless nickel plating and is typically very bright. Medium phosphorous electroless nickel plating offers moderate corrosion and wear protection.
High phosphorous electroless nickel coatings
High phosphorous electroless nickel is alloyed with 10 to 14% phosphorous. This type of electroless nickel coating has a glass-like structure with the highest level of corrosion protection. It is also non-magnetic.
If you would like advice from the experts on which type of electroless nickel coating will best suit your product and it’s use, contact NiTEC on 0845 224 3571, email email@example.com or visit our website to contact a specific member of staff.