Tag Archive for hard chromium replacement

The Use of Electroless Nickel in Valves and Flow Control Devices

Electroless nickel is an excellent choice of surface technology for the oil and gas industry. As discussed in previous blog posts, the properties of elctroless nickel coatings are highly sought after in the industry, including corrosion resistance, uniformity of deposits and abrasion resistance.

Electroless Nickel and Mild Steel Ball Valves

These properties have resulted in the widespread use of electroless nickel coatings in valves and flow control devices, which are critical components in the operation of a well where good performance and long life are major economic factors.

The application of electroless nickel to mild steel ball valves is now typical in the oil and gas industry, replacing hard chromium as a corrosion resistant, smooth and uniform coating.

Successful applications of electroless nickel have been observed in all areas of the oil and gas industry. In crude oil production, mild steel ball valves have a maximum life of no more than three months, and fail due to corrosion, surface cracking and erosion. But valve components plated with electroless nickel last for years with no surface deterioration.

Similar benefits have also been observed on ball valves at plants using the sea water injection system which involves pumping sea water under high pressure to force oil to the surface. With a coating of electroless nickel, the valves withstand the conditions and no degradation is detectable after years of operation.

Electroless Nickel Plating Services

For more information about electroless nickel plating and its use in the oil and gas industry, or to make an enquiry about using electroless nickel for this type of application, call NiTEC UK on 0845 224 3571 or email info@nitec-enp.co.uk