Tag Archive for aerospace coatings

Boeing up in the World

Boeing_777_electroless_nickel_plating

 

 

 

 

 

 

 

The famous aeroplane makers, Boeing, have found what seems to be the “Lightest Metal Ever” known as microlattice.  This is a material which is 99.9% air!  Developed in California, it is a way for planes and even rockets to have their weight reduced.  This 3D open cellular polymer structure will reduce the amount of fuel a plane needs to use during take off, flying and landing.  Currently, Boeing are looking in to using this structure internally on their planes in areas such as the overhead compartments, under the floor and in other fixtures to create a modern internal environment for passengers.

Boeing and Electroless Nickel Plating

Researchers decided that the 3D open cellular polymer structure should be coated with electroless nickel plating, in order to give the structure the required strength, because the web of nickel-phosphorus alloy lattice tubes are only just 100 nanometres thick.  The theory behind using this new structure coated with electroless nickel plating is a lot more advanced in the theory of aeronautical engineering, so has not been trialed yet for space-bound vehicles.  However, it is known that it would be used for exactly the same weight saving reasons to go to space, but also because it has the ability to compress, too, which could mean that objects sent in to space could expand after launch, reducing cargo hold space.  More, evidence will be needed though, before this is trialled as part of a space-bound launch, but nevertheless is a very exciting move forward in science.

Electroless Nickel Plating

Electroless nickel plating as a high quality, cost effective solution for metal coating, elongating the life of a component dramatically, because it leaves an equal thickness metal layer deposit all over the surface of a component, no matter what size or shape it is.  It is ideal for use in harsh environment as it is corrosion resistant, rust is prevented from forming and does not chip or flake which reduces the cost and frequency of repairs and replacement needed.  Electroless nickel plating can be hardened up to 950vhn, is self-lubricating and is non-magnetic.  These are just some of the advantages of electroless nickel plating.  If you would like to find out more then you can find out more by contacting NiTEC UK, the leading suppliers of electroless nickel plating.

Contact NiTEC UK Today

NiTEC UK are experts in the process of electroless nickel plating (ENP) and have a friendly and professional team who are more than happy to help you with any query you may have at any time.  If electroless nickel plating is something you or your business would like to find out more about, then please contact us on 0845 224 571, email us at info@nitec-enp.co.uk or alternatively you can click here to go directly to our website.  Our website contains information about other services we provide, such as diffused nickel plating, copper plating, shot blasting and heat treatment.

UK Aircraft Engine Blade Casting Facility Opened by Rolls-Royce

aircraft blade engine crafting facilityAs experts in metal finishes and plating techniques used in the aerospace industry, we were delighted to read the news about the new £110 million advanced blade casting facility which has been opened nearby in Rotherham. Rolls-Royce have opened the 50,000ft² facility, which is expected to produce more than 100,000 single crystal turbine blades a year, including high pressure (HP) and intermediate pressure (IP) single crystal blades.

New Technology and Modern Manufacturing Processes

Rolls-Royce plan to open the facility in 2017, and it is estimated to bring 150 new jobs into the region. Matthew Hancock, who is the UK Minister of State at the Department for Business, Innovation and Skills said: “This new facility will house the most advanced blade casting facility in the world, and is a truly remarkable feat of engineering. Our aerospace growth partnership has put in place a long-term industrial strategy for the whole aerospace industry, and this investment by Rolls-Royce in new technology and modern manufacturing processes is testament to the ongoing strength of this sector.”

The facility will make use of the manufacturing methods that have already been developed within Rolls-Royce and at the Coventry based Manufacturing Centre. The facility will include automated manufacturing techniques, including integrated wax fabrication lines, 3D structured light inspection and computed tomography (CT).

Turbine Blades for Trent, Rolls-Royce and Airbus

The new plant will produce turbine blades which will be used in various Trent aero engines, Rolls-Royce Trent XWB, which will power Airbus A350 XWB. Each Trent XWB engine requires 182 HP and IP turbine blades, which are 10cm in height and 300g in weight, and undergo 200 processes before being installed. The blades operate at temperatures of up to 200°, and are placed in a disc that rotates at over 12,000rpm. The turbine extracts energy from the engine’s combustor hot gas stream, and uses it to drive the fan and compressors.

UK Based Metal Plating Services

Here at NiTEC, we provide a range of metal finishing and metal plating services. Our high quality electroless nickel plating service is the perfect solution for critical high-end engineering items such as those used in the defence, healthcare, automotive andaerospace industries. For more information, please call NiTEC UK on 0845 224 3571 or email info@nitec-enp.co.uk

New Aerospace Project Could Revolutionise the Design and Manufacture of Aircraft Wings

A group of 13 partners have been chosen to take part in a new £30 million research programme which could revolutionise the design and manufacture of aircraft wings.

Aerospace Technology Institute Backing

aeroplane-wingBacked by the UK’s Aerospace Technology Institute (ATI), the VIEWS (Validation and Integration of Manufacturing Enablers for Future Wing Structures) programme will develop wing design, manufacture and assembly technologies so that they are near to being ready for use in the aerospace market.

In addition, they will select some other novel technologies that may be suitable for further development in the future.

Partners of the VIEWS Programme

Partners of the VIEWS programme include the Universities of Nottingham, Bath, Bristol and Sheffield Hallam; as well as five of the UK’s high value manufacturing catapult centres: the National Composites Centre, the Manufacturing Technology Centre, the Advanced Manufacturing Research Centre (the University of Sheffield),the Warwick Manufacturing Group (the University of Warwick) and the Advanced Forming Research Centre (the University of Strathclyde). The four industrial partners involved are as follows: GKN Aerospace, Bombardier Aerospace, Spirit AeroSystems, and GE Aviation.

Aircraft Wing Architecture

The programme will be based on technologies emerged from the structures technology maturity (STeM) research programme and will indentify tools and other manufacturing requirements to produce wing architectures and improve the process design and flow of production. It will also study inspection and repair tools and progress various composite and metallic manufacturing and assembly processes.

GKN Aerospace technical director Rich Oldfield said: “STeM saw us make valuable progress and VIEWS will work from that base, taking us nearer to market readiness with a new generation of automated processes and technologies that will extend what we in the UK are able to manufacture, at the same time as increasing the quality, consistency and speed of production.”

Metal Finishing Services for the Aerospace Industry

Here at NiTEC UK, our metal plating services are widely used in the aerospace industry for everything from aircraft engine mounts to aircraft control systems. For more information, please call NiTEC UK on 0845 224 3571 or email info@nitec-enp.co.uk

Record Orders for Britain’s Aerospace Industry

Britian’s aerospace order book has reached a record high after the success of Farnborough airshow. According to The Daily Telegraph, orders for British made commercial aircraft and engines have reached the highest they’ve ever been thanks to a boost in orders generated at the airshow.

ADS, the trade organisation for the Aerospace, Defence, Security and Space Industries have revealed that the total orders that UK manufacturers have on their books stands at over 12,000 aircraft and more than 21,000 engines. This is estimated to be a combined value of between £135bn and £155bn.

9 Years of Work for the Aerospace Sector

It has been estimated that these orders equal approximately 9 years worth of work for companies in the aerospace sector. Chief Executive of ADS Paul Everitt said: “As an important event for the global aerospace industry, we expected to see a peak in orders during the Farnborough airshow. However, the volume of firm orders placed throughout July was unprecedented; adding almost 650 aircraft and 1,100 engines an already robust order book.”

The Aerospace Growth Partnership

According to the chief economist at ADS Jeegar Kakkad, these impressive figures are proof that the government’s industrial strategy to champion aerospace has been a success. “Countries around the world are sitting up and taking notice of what is going on in the UK aerospace industry with the Aerospace Growth Partnership (AGP) and thinking, ‘We can use the UK as a base to launch into’,” he said. “Countries are too, with Germany wondering how we have taken market share from them and the US looking at how we set up the AGP.”

airbus A350UK Aerospace Industry Facts

  • Annual turnover of the UK aerospace industry – £27.8bn
  • UK share of global aerospace market – 17%
  • Number of people either directly employed or jobs supported by the aerospace industry – 229,100
  • Backlog of aircraft orders – 12,096
  • Backlog of engine orders – 21,094
  • Year’s worth of work at current levels – 9

Increased Sales of Aircraft Engines

A spokesman for Airbus said: “The Farnborough airshow was excellent as Airbus won 345.4bn billion worth of business for a total of 496 aircraft. This is particularly good news for the UK where the wings for our aircraft are designed and manufactured.

“Airbus sustains work for more than 100,000 people through an extended supply chain of more than 1,000 companies located across the UK, around 45 per cent of which are SMEs. The continuing strong order book helps to maintain the UK’s position as a European and global leader in aerospace.”

Metal Finishing and Metal Plating Services

As experts in a range of metal finishing techniques that can be used in the aerospace industry, such as electroless nickel plating, NiTEC are incredibly pleased that the sector is experiencing such a boom. It’s fantastic news for the future of the UK aerospace industry!

Aerospace and Defence Set to Rebalance the Economy

Farnborough International Airshow 2014 takes place this week, an event known throughout the world for promoting UK engineering excellence and industrial expertise. Aerospace and defence industry leaders will gather at the air show to discuss new technologies and trends, sharing the very latest thinking and exploring new opportunities within the sectors.

Airbus site Filton Bristol

The Hampshire Airport will play host to politicians, military officials and airline executives from all over the world as the global aerospace and defence industry meet to display and discuss the latest commercial airliners, fighter jets and drones.

Domestic manufacturing giants Airbus, BAE Systems and Rolls-Royce will be in attendance. On the commercial side, airline executives will no doubt be tempted by Boeing and Airbus, looking for multibillion dollar deals, while Rolls-Royce anticipate sales for the engines that power the aircraft.

The Thriving UK Aerospace Industry

The aerospace industry is experiencing a definite upturn in fortune, with global air passenger traffic on the rise and the continued demand for new aircraft. Major aerospace companies have thousands of aircraft on order and have been regularly increasing the rate of aircraft deliveries. This is having an impressively positive effect on UK businesses too; the latest global commercial aircraft data shows that orders are worth an estimated £150bn to the UK alone.

This event provides the UK with an opportunity to make real waves in the aerospace and defence sectors, underlining its prominent role despite cuts being made globally. Paul Everett, chief executive of ADS, the aerospace and defence trade body, told the Guardian newspaper, “Aerospace sustains high-value long-term jobs in the UK. We help create a rich science base with the kind of high-skilled jobs that politicians dream about. Aerospace is unquestionably the Premier League of our manufacturing industries.”

Engineering Excellence

The success and appeal of the Farnborough Airshow owes much to the UK pioneers and innovators who have contributed to revolutionising the aerospace industry. The UK remains a significant industrial power in the sector, and a huge amount of the aircraft that will be flying, and on display, at the airshow rely on the advanced skills, manufacturing and engineering excellence of the UK.

Metal Plating for Aerospace and Defence

If you would like to find out more about our metal plating and coatings for use in the aerospace and defence industries, call us on 0845 224 3571, email us at info@nitec-enp.co.uk or visit the contact page on our website to make an enquiry.

Significant Growth in the Aerospace and Automotive Sectors

In the last 5 years, the aerospace and automotive industries have reported significant growth, despite the manufacturing sector in the UK’s having declined dramatically over the past 30 years.

The Financial Times has reported that “Britain’s manufacturers are using cutting edge technology and gadgets to improve products and processes as the sector accelerates it recovery.”

Revival in Manufacturing

British companies have contributed to the growth in the aerospace and car making industries, leading many to believe that the future of UK manufacturing is in the hands of those that use innovative technology, or so called “advanced manufacturing.”

The Financial Times’ recent analysis of the Office for National Statistics’ has found that the British aerospace industry’s output is up by 60% and the automotive industry up by 40% compared to 5 years ago.

Coatings for the Aerospace and Automotive Industries

Here at NiTEC, we regularly operate in the aerospace and automotive sectors, providing a range of surface technology options which include electroless nickel plating, diffused nickel plating and other metal plating and surface treatments.

car illustrating growth in automotive industry

Electroless nickel plating can be used for a wide variety of functional applications and includes many advantages. Electroless nickel coatings are have excellent levels of hardness, lubricity and corrosion resistance. The coating is also able to cover components with complex geometrics and cover internal and external surfaces evenly.

We recently became approved suppliers for the aerospace company HS Marston Aerospace Limited. Our staff are fully committed to developing our services for use in the aerospace sector and are understandably delighted that our services are compliant with HS Marston’s quality standards and requirements.

If you would like to find out more about our metal plating and coatings for use in the automotive and aerospace industries, call us on 0845 224 3571, email us at info@nitec-enp.co.uk or visit the contact page on our website to make an enquiry.

NiTEC Are Now Approved Suppliers for HS Marston Aerospace Ltd

We are pleased to announce that we are now approved suppliers for HS Marston Aerospace Limited. HS Marston is a great company and we are delighted to have been approved as their suppliers.

Commitment to the Aerospace Sector

Quality Director Paul Allen said: “I am particularly proud of this approval as Marsden are a very well respected aerospace company. This approval demonstrates NiTEC’s commitment to the aerospace sector.”

HS Marston Aerospace Limited has been providing products for use in the aerospace industry for more than 90 years. Today, they supply a range of heat transfer and fluids management products for commercial and military markets. HS Marsden’s products are used within airframes and engines and on fixed wing aircraft and helicopters.

Approval certificate for HS Marsden

Full Compliance with HS Marston Aerospace

The scope of our approval is as follows: ‘This approval requires full compliance with HS Marston Aerospace Limited, Purchase Orders, Quality Standards and Requirements for Suppliers and Subcontractors defined in Company Standard ME1019.’

Here at NiTEC, we operate in a variety of sectors and endeavour to provide the right service for each industry.

Whether it is electroless nickel plating, diffused nickel plating, shot blasting or heat treatment, we will work with your requirements to make sure that you get the highest quality service at a cost to suit your business.

For more information about our services,  call us on 0845 224 3571, email us at info@nitec-enp.co.uk or visit the contact page on our website to make an enquiry.

 

Boom for UK Aerospace Orders after 2013 Record Year

According to The Manufacturer, the industry’s leading publication of manufacturing news, articles and insights, last year was a record year for the aerospace industry in the UK.

The trade organisation ADS, who work to advance the UK Aerospace, Defence, Security and Space industries,  have reported that UK orders of commercial aircraft have increased by 28% in the last year. This makes 2013 a record year for the aerospace industry, with orders rising more than a quarter compared to 2012.

According to the ADS, there is also now a backlog of orders for commercial aircraft, including 20,000 engines and 11,000 aircraft. This backlog of orders is set to keep the UK aerospace industry, and its employees, busy for approximately 9 years!

“Growth in the aerospace industry”

UK aerospace boom for manufacturing industry“These figures highlight the opportunity for growth in the aerospace industry and the potential rewards that British businesses could reap,” said Business Secretary Vince Cable.

He also suggested that by working together, the UK government and industry can make sure that the opportunities are optimised.

Mr Cable said: “Together we have committed £2 billion over the next 7 years to create an Aerospace Technology Institute to help us win work on developing and building the planes and helicopters of the future, here in the UK. The Aerospace Industrial Strategy, which the Government has developed jointly with industry, is giving businesses the confidence to invest in the UK, creating more high-skilled, long-term jobs.”

Paul Everett, CEO of ADS said, “Global demand for new aircraft and engines is generating new demand and opportunity for the UK aerospace industry. The Aerospace Growth Partnership and the government’s long-term commitment to the sector’s growth is making a difference and we must continue to maximise the value of this unique collaboration between industry and government.”

UK specialise in aircraft manufacture

ADS has predicted that by 2032, there will be demand for the following:

  • 29,000 large civil airliners
  • 24,000 business jets
  • 5,800 regional aircraft
  • 40,000 helicopters

It’s great news, as the UK specialise in the development and manufacture of some of the most complicated and high tech parts of modern aircraft.  ADS predict that this means a potential market share of around $600bn for the UK.

Here at NiTEC electroless nickel plating specialists, we are thrilled that UK manufacturing is thriving. The aerospace industry is a growing sector and there is so much talent in the industry in this country. Our electroless nickel plating services can be used for a wide variety of industries including oil and gas, aviation and aerospace, so it’s fantastic news for us too.

If you would like more information about our electroless nickel plating services call us on 0845 224 3571, email us at info@nitec-enp.co.uk or visit the contact page on our website to make an enquiry.