Archive for Nickel PTFE

Plating to Perfection

metal plating company OscarThey were first designed in 1928.  They are made in Chicago.  They are plated in copper, nickel and silver before being coated in 24-carat gold.  What are we talking about?  An Oscar!

These 14 inch, 8.5 pound statuettes are the literally the definition of perfection in more ways than one.  If they are not perfect, then the makers are lead to starting the statuettes from scratch, time and time again.  But once they are deemed perfect, they are guaranteed for life!  The iconic Art Deco Academy Award takes a long 10 days to repeat from start to finish, partly because there is only one Oscar mould and also because so many processes take place in their production, such as electroplating.

About the Oscar

It was designed by Cedric Gibbons, the MGM art director, who sketched the subjected standing on a film reel with five spokes.  These five spokes represent the original five branches of the Academy and was originally called the Academy Award of Merit.  Each Oscar is engraved with a serial number and now over 3,000 Oscars have been awarded.  These Oscars may begin their lives in Chicago but one classified as ‘perfect’ are packaged and flown, with guards, to Los Angeles for the award ceremony.  An interesting fact about Oscars is that although they are guaranteed for life, if they are damaged, an actor can send them back and have them either replaced or restored to their former glory.  They are meant to be priceless objects and there is an act to say that they are not resalable.  However, this electroplated objects of splendour have continued to be traded in the shadows with some of the highest sales exceeding $250,000 and Michael Jackson paid $1.5million for a Best Picture award for Gone With The Wind 1939 in 1999.

Find Out More About NiTEC UK Today

If you are interested in finding out more about any of the plating processes which you have read about in this article, such as copper plating, electroless nickel plating or diffused nickel plating, then why not get in touch with NiTEC UK today?  We are leading specialists in the plating industry based in Derbyshire, England, and offer an array of developed techniques which are both high-end and cost effective.  We work in the aerospace, automotive and medical industries to name but a few and we offer our services to the UK, France, Holland, Brazil and Germany.  So if you need plating done to perfection, call us today on 0845 224 3571 or alternatively email us at info@nitec-enp.co.uk

Slippery Nickel: Electroless Nickel PTFE Plating

connector nickel teflonElectroless nickel PTFE, otherwise known as slippery nickel, is a composite nickel/PTFE coating that offers a huge range of benefits to a variety of industries. The main reason that nickel PTFE is so popular is due to its properties of low friction and self lubrication, making it a great choice for sliding wear applications and other instances where conventional lubricants cannot be used.

The Co-Deposition of Electroless Nickel PTFE

During the co-deposition process of nickel PTFE, Teflon particles are plated along with the electroless nickel and become part of the plated coating itself. This technique ensures that the plated coating has high lubricity throughout the life of the plated part, because as the coating wears, PTFE particles are exposed continuously. That means that the Teflon particles are present throughout the entire thickness of the coating.

Release Properties and Uniform Coverage

Nickel PTFE improves the “release” or anti stick properties of molds and dies due to its self lubricating properties. It also increases the efficiency of, and reduces the sound made by slides, bearings and cylinder or piston assemblies. This property also facilitates the reliable operation of moving parts when they are continuously exposed to solvents or are working in cryogenic temperatures. Nickel PTFE provides an exceptionally uniform coverage, including corners, threads and bores. There’s also no need for post-plating finishing.

Common Applications of Nickel PTFE

A comprehensive list of the common applications of nickel PTFE is published below.

  • Rubber and plastic molds
  • Transmission components
  • Core pins
  • Couplings
  • Slides
  • Frozen food molds
  • Camera shutters
  • Valve stems
  • Rotating cores
  • Fiber and yarn guides
  • Gears
  • Hydraulic cylinders
  • Fuel system components
  • Clutch components
  • Tablet punches
  • Pistons
  • Pump rotors
  • Bearings
  • Spray nozzles
  • Air caps
  • Security bolts
  • Pneumatic equipment
  • Hydraulic equipment
  • Shafts

What Substrates can Nickel PTFE be Applied to?

Nickel PTFE can be applied to a variety of substrates including copper alloys, titanium, aluminium, mild steel and stainless steel.

If you are looking for a metal coating that is self lubricating, corrosion resistant and wear resistant, Ni-PTFE is the perfect solution. Call us on 0845 224 3571, email us at info@nitec-enp.co.uk or visit the contact page on our website to make an inquiry.

Types of Electroless Nickel Plating and the Different Benefits of Each

As experts in the process of electroless nickel plating, we offer a range of metal plating services which all have different properties. Here’s a guide to our main services, including the benefits of each.

electroless nickel plated componentLow Phosphorus Electroless Nickel Plating

A low phosphorus electroless nickel coating typically contains 2.5% phosphorus. This produces a very uniform porous free coating which uniformly covers the complete surface of the component, including inside recesses. It has excellent corrosion resistance in alkaline conditions, but the coating is relatively soft, below 235VPN, and is therefore not particularly wear resistant.

Medium Phosphorus Electroless Nickel Plating

Medium phosphorus solutions contain between 6 and 10% phosphorus and produce a coating which effectively combines intermediate hardness with good corrosion resistance. Medium phosphorus coatings deposit rapidly and produce a bright or semi-bright coating.

High Phosphorus Electroless Nickel Plating

High phosphorus electroless nickel typically contains a phosphorus content of between 10-12%, making it ideal for applications where a uniform, hard and highly corrosion resistant coating is required. Other advantages include low porosity, pit-free deposits and a very stable and robust coating.

nickel ptfe plated componentNickel PTFE Plating

Nickel PTFE plating is a unique plating solution that combines the hardness of electroless nickel with the lubricity of Polytetrafluoreothylene (PTFE). Its properties of low friction wear and self lubrication make it an excellent choice for sliding wear applications, and instances where conventional lubricants would be harmful to components.

Nickel Boron Plating


Nickel boron
is a surface deposit coating that can be applied to a wide range of metals including steel, stainless steel, nickel alloys, aluminium, cobalt alloys, copper alloys, and titanium. It is a great alternative to chrome plating and has many benefits, including excellent wear and corrosion resistance. It is also resistant to fretting and galling, resistant to abrasion, ductile, solderable and has excellent rigidity.

Nickel Diamond Plating

nickel diamond platingThe features of nickel diamond plating enable it to provide a highly corrosion and wear resistant coating. Due to the electroless chemical method of deposition, nickel diamond plating is able to cover surfaces with perfect uniformity. Therefore, regardless of the geometry of the component, the nickel diamond coating creates a uniform deposition on all areas of the part, even on recesses and holes. Nickel diamond plating has many other benefits which make it a superior choice of coating, including hardness and increased thermal transfer.

Electroless Nickel Plating Service

Contact us today on 0845 224 3571 or email us at info@nitec-enp.co.uk to talk through your electroless nickel plating requirements. We are able to talk you through the different services that we offer, and provide more details on the benefits of each one.

Friction Free, Self Lubricating Electroless Nickel PTFE Coatings

nickel ptfe plated component

The PTFE composite coating of electroless nickel is known for its self lubricating properties and exceptional resistance to friction.

By combining the high wear resistant hardness, uniform coating and excellent adhesion of electroless nickel with the self lubricating properties of PTFE, it is a perfect surface treatment for components and assemblies that cannot use conventional lubricants.

Prevent Calcium Scale Build Up with PTFE

PTFE plating provides a great release from calcium that is often found in hard water areas. In addition to the corrosion resistance of the plated layer, the common problems of the build up of scale on a component can be avoided. This is especially useful when an electroless nickel PTFE coating is used on food processing equipment, heating elements and spray nozzles, as it prevents the build up of this calcium deposit which could hinder the effectiveness of the equipment.

The Process of Electroless Nickel PTFE Plating

During the process of electroless nickel PTFE plating, a coating is applied that consists of an autocatalytically applied nickel/phosphorus matrix containing submicronic particles of polytetraflouroethylene. PTFE is actually fairly soft in its natural form, but when suspended in nickel, it is very durable.

This means that components with PTFE coatings are hard enough to resist corrosion and abrasion, and also have friction resistance from the PTFE, which ensures that parts have a long working life. This coating also has the benefit of producing a uniform coating which covers all surfaces of the part, even those with especially intricate geometries.

Key Properties for Electroless Nickel PTFE

  • Low Friction
  • Self Lubrication
  • Corrosion Resistance
  • Wear Resistance
  • Uniform Deposit

Typical Applications Electroless Nickel PTFE

  • Food processing equipment
  • Sorting equipment
  • Injection Molds
  • Pump rotors
  • Titanium bearings
  • Heating elements

If you are looking for a metal coating that is self lubricating, corrosion resistant and wear resistant, Ni-PTFE is the perfect solution. Call us on 0845 224 3571, email us at info@nitec-enp.co.uk or visit the contact page on our website to make an inquiry.

Composite Coatings of Electroless Nickel Plating

The chemical makeup of electroless nickel can be specially tailored to obtain the maximum coating performance for the requirements of particular applications. Composite electroless nickels incorporate distinct properties into the deposit in order to impart a specific property onto the component, and are used in a variety of industries. Here at NiTEC UK, we provide a number of electroless nickel composite coatings including nickel diamond plating, nickel PTFE and nickel boron.

electroless nickel composite coatingElectroless Nickel and PTFE Composite Coating

A Ni-PTFE composite coating combines the properties of electroless nickel with Polytetrafluoreothylene (PTFE). Electroless nickel coatings are typically very hard, and PTFE is good for its lubricity, therefore combining the two produces a very useful coating for several industries including automotive, machinery, and engineering. Nickel PTFE has properties of low friction wear and self lubrication which make it an excellent choice for sliding wear applications, and instances where conventional lubricants would be harmful to components.

Nickel Boron Composite Coating

Electroless nickel can also be combined with boron as an alternative to chrome plating, producing a coating that is excellent wear and corrosion resistance properties. A composite coating of electroless nickel and boron will reduce the drag and friction of surfaces that slide up against each other. Also, its nodular surface allows it to dissipate heat efficiently.

Nickel Diamond Composite Coating

As the name suggests, nickel diamond coatings combine an electroless nickel deposit with fine particles of diamond. Using diamond particles in this way is a really cost effective method of utilising the benefits of diamond on the surface of a component, providing a highly corrosion and wear resistant coating.

Electroless Nickel Composite Plating Services

For more information about the composite nickel coatings offered by NiTEC UK, contact us on 0845 224 3571 or email us at info@nitec-enp.co.uk. Our staff will formulate the right solution for your application, providing advanced nickel composite plating services to meet your needs.

No Need For Liquid Lubricants With Nickel PTFE Coatings

Here at NiTEC, our experience in the metal finishing and surface technology fields allow us to work with a variety of customers from a wide range of industries. One of the specialist services we offer is nickel PTFE plating, a unique plating solution that combines the hardness of electroless nickel with the lubricity of Polytetrafloureothylene, otherwise known as PTFE.

Lubricious and Hard Metal Coating

nickel ptfe plated component

The PTFE coating is perfect for those customers that require a lubricious, hard, uniform coating that can be accurately deposited across the surface of the component. Our electroless nickel/PTFE composite is a fantastic coating that properties of PTFE with those of electroless nickel.

PTFE is self lubricating, has excellent low friction and release properties. Combined with the wear resistance, corrosion resistance and hardness of electroless nickel, Ni-PTFE is the perfect surface treatment. Its self lubricating properties also make it ideal for components that are unsuitable for conventional lubricants.

What are the Key Properties of Nickel PTFE?

Nickel PTFE has many fantastic properties including the following:

  • Corrosion resistance
  • Wear resistance
  • Low friction
  • Uniform deposit
  • Lubrications

Where Can Nickel PTFE Coatings be used?

Our nickel PTFE coating provides low friction wear and self lubrication, which makes it an excellent choice for sliding wear applications and other instances where conventional lubricants would be harmful to the components. The Ni-PTFE plating process has been used extensively in the following industries:

  • Automotive
  • Machinery
  • Engineering
  • Mold and Die

If you would like more information about Nickel PTFE and the benefits it can have for your metal plating requirements, feel free to call the friendly team at NiTEC on 0845 224 3571 or email info@nitec-enp.co.uk. Alternatively, visit the NiTEC website at http://www.electroless-nickel-plating.co.uk

Nickel PTFE Self Lubricating Corrosion Resistant Coating

Nickel PTFE has natural self lubricating properties, which eliminate the need for liquid lubricants on components. The coating is not only slippery; it also has low sliding wear.

Nickel PTFE – Lubricity and Wear Resistance

Lubricity plays an important part in optimising wear resistance because it inhibits contact between the mating surfaces, reducing friction between them and therefore reducing heat which may be generated.

This self lubrication reduces the wear of nickel plated components through friction, therefore creating minimal coating weight loss. Due to nickel’s self lubrication, friction between parts is significantly reduced.

We have customers in the automotive, aerospace and oil and gas industries that all use Nickel PTFE as their choice of durable, dry lubrication and anti-galling coating.

Reduce friction between components

Reduced friction between nickel plated components reduces heat generation and reduces the formation of wear particles. Reduced friction also improves efficiency.

Protect against wear with dry lubrication

The self lubricating properties of a nickel PTFE coating also prevents wear because the moving parts are kept apart.

What can nickel PTFE be used on?

  • Valve seats and pump bearings
  • Connectors
  • Fasteners
  • Circuit breakers
  • Mould tools
  • Machine tools
  • Spindles
  • Clutches and splines
  • Cylinder liners
  • Medical moulds

If you are looking for a nickel coating that is self lubricating, corrosion resistant and wear resistant, Ni-PTFE is the perfect solution. Call us on 0845 224 3571, email us at info@nitec-enp.co.uk or visit the contact page on our website to make an enquiry.

Features of Electroless Nickel PTFE Coatings

Nickel-PTFE combines the engineering properties of nickel with the lubricity of polytetrafluoroethylene.

Just like standard electroless nickel, the Nickel PTFE deposit occurs as a result of an autocatalytic chemical reaction which allows a reliable, repeatable coating of uniform thickness. This coating makes it possible to coat parts with sharp edges, seams, threads, deep recesses and complex shapes.

During the plating process, the PTFE particles become embedded throughout the deposit of nickel. The unique composite of Nickel PTFE allows for renewed polytetrafluoroethylene at the surface of the component, even as the coating wears. The chemical process involved in the production of Ni-PTFE coatings means that the PTFE is uniformly dispersed throughout the nickel deposit in order to ensure optimum performance in high friction and non-lubricated applications.

Features of Nickel PTFE Coatings

  • Long life lubrication
  • Dry lubrication, reducing sticking and galling
  • Good mold release, eliminating spray releases
  • Hydrophobic
  • Uniform coverage, particularly good for complex shapes
  • Can be heat treated for increased hardness
  • Good for hign friction applications
  • Natural lubricity eliminating the need for standard lubrication
  • Moving parts such as slides and bearings work with improved efficiency and quieter operation

If you are looking for a nickel coating that combines the lubricity of polytetrafluoroethylene with the hardness and corrosion resistance of electroless nickel, NiTEC can help. Call us on 0845 224 3571, email us at info@nitec-enp.co.uk or visit the contact page on our website to make an enquiry.

Lubrication and Corrosion Resistance for Sliding Wear Applications

NiTEC UK’s unique plating solution, Ni-PTFE, is the latest technology in self lubricating coatings, combining the hardness of electroless nickel with the natural lubricating properties of Polytetrafluoreothylene (PTFE).

Ni-PTFE is a nickel coating with a slippery, low friction surface, with low sliding wear.

This highly advanced plating process is commonly used in a variety of industries where its properties are particularly useful and valuable.

 

Ni-PTFE is often used in the following industries:

  • Automotive
  • Machinery
  • Engineering
  • Mold and Die

Ni-PTFE is a great choice for sliding wear applications because of its self lubricating properties. Ni-PTFE is perfect in instances where conventional lubricants would be harmful for the components involved. For example, it can be used for components in electronic equipment, and other types of equipment where a conventional lubricant would be harmful.

Benefits of Ni-PTFE

  • Low friction and wear due to its self lubricating properties.
  • Hard surface with high load-carrying capacity.
  • Allows for even coverage of a component with better control of the thickness levels of the coating.
  • Better anti-galling and anti-seizure.
  • Smoother, more attractive surface.

If you are in need of a metal coating that combines hardness with lubricity, Ni-PTFE is the perfect solution. Call the friendly team at NiTEC on 0845 224 3571 or email info@nitec-enp.co.uk for more information. Alternatively, visit the NiTEC website at http://www.electroless-nickel-plating.co.uk/products-and-services/ni-ptfe-corrosion-prevention.php