Archive for General Plating

Bronze, Silver, Gold

nickel-silver-gold-copper-plating-nitecAmerica, pre-1965.  Everyone had some silver coins, saved silver coins and spent silver coins – silver money was a part of natural, normal everyday life.  Nowadays, the choice you have for acquiring gold and silver bullion, is best if you do so via historic metal, like silver coinage.  This occurred in America, when their government cut their ties with gold in 1933, but they continued to have access with ease to silver for the next three decades.  This however, was abandoned in 1965 due to America slipping in to irreparable bankruptcy.

Gold Price Sells Silver

It’s a known fact that the higher the price of gold, the more silver is sold and copper plated currency isn’t used at all.  The ratio of silver to gold today is 79:1 with prices estimated $16 : $1,250.  So obviously in an economic meltdown, cheap silver will be chosen over the more expensive (90 per cent) and once these have both been exploited they will then turn to the gold.

Common Plating

Plating facilities match base metals with a wide array of coating surface metal finishes.  The most commonly used are copperbrassnickel, steel and bronze.  In order to decide which surface metal is used to coat for the finish, the components uses are highly considered so that the manufacturer can get the highest performance and longest lasting component part electroplated.

As examples:

Gold plating is the perfect solution for electrical conductivity, heat protection and corrosion and can survive in a multitude of environments and temperatures.

Silver plating is commonly used in the electrical industry dues to its low electrical resistance.

Nickel plating is ideal for the chemical industry.  It protects against chemicals and is corrosion and wear resistant.

Copper plating is most commonly used in the automotive industry.

Contact Us Today at NiTEC UK

If you or your business are interested in plating, be it electroless nickel plating or copper plating or heat treatment which may require specialist assistance, then get in touch with NiTEC UK?  A Derbyshire based company, we are leading specialists in the plating industry offering a wide range of well-developed, tried and tested techniques which are high-end and also cost effective.  We have experience of working for many different industries, including the aerospace, medical, army and automotive industries, to name but a few.  We offer our services to the whole of the UK, Germany, France, Brazil and Holland.  Call us today on 0845 224 3571 or alternatively you can email us at info@nitec-enp.co.uk

Heat Treatment and Homogenising

aluminium-heat-treatment-alloy-nitecWhen you think of heat treatment, I wonder what type of metal you associate it with?  Aluminium is probably not the first metal that springs to mind.  Why?  Because it is thought of as being a soft metal.  But there are certain, specific alloys which respond incredibly well to heat treatment, in fact, they actually respond in almost the same way as steel and iron.  So, what are the specific types of aluminium alloys?  They are aluminium alloys containing copper, zinc, or a blend of magnesium and silicon which enable them to respond well to the heat treatment process.  Be aware that pure aluminium and aluminium alloyed with manganese or magnesium does not work under heat treatment.  Therefore, when referring to the heat treatment process during this article, it is aluminium alloys containing copper, zinc or a blend of magnesium and silicon that is being referred to.

Harmonious Homogenising

Aluminium alloys come in to contact with the mold via their outside edge first, which forms a layer or skin of aluminium crystals, which are called grains.   This occurs when aluminium alloys are being cast.  They cool from the outside in, with the elements of the alloy precipitating which locks crystals in regionally.  This is how some areas become hard and some remain soft.  To even this imbalance out, we need homogenizing, so that redistribution of the precipitation can occur.  This means that the temperature needs to be taken to just below melting point which is between 900 and 1000 degrees farenheit.  Having reached the homogenizing temperature, the component is left to cool slowly, so that the internal structures uniformity is reached.

Annealing Aluminium Alloys

If you then require you aluminium alloys to be shaped, you will then require another process which is known as annealing.  The alloys must be heated once again to 570°F to 770°F for anywhere between thirty minutes to three hours, depending on the alloys composition and the component part.  Unlike the heat treatment or homogenising processes, the cooling process post annealing is not a critical factor in this process.

NiTEC UK and You

If you or your business are interested in the heat treatment process, or plating whether it is tin plating electroless nickel plating or copper plating, then why not get in touch with NiTEC UK.  A Derbyshire based company, we are leading specialists in the plating industry offering a wide range of well-developed, tried and tested techniques which are high-end and also cost effective.  We have experience of working for many different industries, including the aerospace, medical, army and automotive industries, to name but a few.  We offer our services to the whole of the UK, Germany, France, Brazil and Holland.  Call us today on 0845 224 3571 or alternatively you can email us at info@nitec-enp.co.uk

Why Tinplate is Great

tin-plating-company

Tin is a common silvery coloured metal which is obtained from a mineral called cassiterite.  It is produced most commonly by China, though often in Indonesia and Peru do their fair share in world its production, too.  Tin has many uses and is one of the preferred metals due to its multifunctional characteristics.  It is malleable, ductile and does not easily oxidise when in contact with air.  Due to these qualities, tin is therefore great for soldering and tin plating.

Tin for Tin Plating

Tin is used for plating and this is a process of coating another metal.  This other metal is often something like iron or steel, which the tin coats in order to create a corrosion resistant and rust free finish which is also lightweight.  The most common use for tinplate is for roofing and sometimes walling.  The term ‘terneplate’ specifically refers to iron or steel which has been tin plated but which has also has lead added to it for extra durability.

Where did Tin Plating come from?

Tin plating originated in the 1800s, when tin cans were first used in order to preserve food.  They were quickly seen as being appropriate for this use because they did not erode or corrode when left for long periods of time.  Today, tinplate accounts for approximately 17% of tin consumption.

What are the Advantages of Tin Plating?

  • Transformable without any cracking
  • Enhances the performance and durability of the component
  • Extremely resistant to any corrosion
  • Extremely resistant to any tarnishing
  • Good conductor of electricity
  • Usable across a number of industries
  • Not easily oxidized in air
  • Typically non-toxic

Contact Us Today at NiTEC UK

If you or your business are interested in plating, be it tin plating electroless nickel plating or copper plating which may require specialist assistance, then get in touch with NiTEC UK?  A Derbyshire based company, we are leading specialists in the plating industry offering a wide range of well-developed, tried and tested techniques which are high-end and also cost effective.  We have experience of working for many different industries, including the aerospace, medical, army and automotive industries, to name but a few.  We offer our services to the whole of the UK, Germany, France, Brazil and Holland.  Call us today on 0845 224 3571 or alternatively you can email us at info@nitec-enp.co.uk

 

The Copper Plating Story

story-copper-plating-nitec-derbyshireWe all know plenty about Copper Plating, but what we often don’t know a great deal about is where the process originated from.  I bet you would be interested to learn that it was not at all intentional, but was, in fact, a complete mistake!

Where did Copper Plating come from?

This happy accident occurred centuries ago in 1724, when Thomas Bolsover, a Sheffield cutler, was mending the handle of a silver knife.  He was doing so with the assistance of a copper coin under the pressure vice but got a little distracted and the two metals both became heated.  Due to their heating, they fused together, the silver completely hiding the copper.  This mistake led Bolsover to experiment with other methods of retaining silver and copper together in unity whilst also being one, workable material, and this worked.  This was Bolsovers happy accident, as this was the beginning of the Sheffield Plate.  Dying in 1788, Thomas Bolsover was regarded in his obituary as the first inventor of plated metal, though sadly not the most well known.

All About Copper Plating

Copper Plating is not only undertaken for functional purposes but for decorative purposes, too.  Often used for road mending techniques, medics and in telecommunications, it really is a multifunctional plating technique.  This is due to it being an excellent conductor, has a good ability to shield against electro magnetic interference and radio frequency interference, along with it having excellent levelling properties.  Copper plating is highly thought of in the medical world due to the fact that it naturally kills bacteria, thus making it a great protection against infections and diseases, so often also used in laboratory settings, too.

Contact Us Today at NiTEC UK

If you or your business are interested in plating, be it copper plating, electroless nickel plating or heat treatment which may require specialist assistance, then why not get in touch with us, here at NiTEC UK?  We are a Derbyshire based company and are leading specialists in the plating industry, offering a wide range of well-developed, tried and tested techniques which are high-end and also cost effective.  We have experience of working for many different industries, including the aerospace, medical, army and automotive industries, to name but a few.  We offer our services to the whole of the UK, Germany, France, Brazil and Holland.  Call us today on 0845 224 3571 or alternatively you can email us at info@nitec-enp.co.uk

 

Copper Plating and the Use of Copper Balls

copper-plating-process-nitec-ukCopper balls have been specially designed to aid the quality of electroplating.  The balls are 25mm, 31mm, 40mm or 50mm in diameter and are made up of 99.9% copper and between 0.04 and 0.06% phosphorus.  They enable the quality of copper plating to be heightened.  This is due to them being able to give free flowing material which dramatically reduces the development of sludge during the process of plating.  This is their sole purpose.  It is also useful that they are able to reduce sludge development because this extends the anode baskets life because the sludge does not erode them.

Successful Copper Plating

The anodes are created using the purest of copper which is oxygen free.  The anodes must be made out of oxygen free copper so that the correct phosphorus content occurs for the electroplating process to be successful.  This process is watched and monitored strictly for quality control and this highly automated process creates a product of great uniformity and high quality of plating.

Why Choose Copper Plating?

Copper plating is functional and decorative.  It is well known for being an excellent conductor.  The deposited layer which is left when copper plating occurs is very bright and levels well.  Copper plating is often used in Medical settings or laboratories due to it being able to kill off bacteria naturally without need for any chemical assistance.  In reference to its decorative flare – this is due to its highly polished copper-pink appearance.  Lacquers can be applied so as to prevent tarnish from building up on the copper plating if it is solely intended for decorative use.

Contact NiTEC UK Today

If you or your business are interested in copper plating, or other plating methods, such as electroless nickel plating or diffused nickel platingheat treatment or have a special project which requires specialist assistance, then why not contact NiTEC UK?  We are Derbyshire based, leading specialists in the plating industry who offer a wide range of well-developed, tried and tested techniques which are not only high-end but also cost effective.  We have experience of working for the aerospace, medical, army and automotive industries, to name but a few and offer our services to the whole of the UK, Germany, France, Brazil and Holland.  Call us today on 0845 224 3571 or alternatively you can email us at info@nitec-enp.co.uk

 

Is Copper Plating the New Solar Panel Platform?

taiwan-copper-plating-nitecIt seems that the Industrial Technology Research Institute of Taiwan (ITRI) have discovered that Copper plating could be the solar panel platform.  They intend to cooperate with aiding the development of copper plated solar panels on a small-scale, fast production.  The collaboration between Motech Industries, Gintech Energy Corporation and TSEC Corporation and that of the ITRI seems to have captured gaps in the photovoltaic (PV) global market.

Copper Plating and Taiwan

The General Director of ITRI’s Green Energy and Environment Research Laboratories, Dr. Robert Yie-Zu Hu, stated that this brand new development has in fact been in research state since 2012 and that the copper plating for silicon solar cells metallization technology currently achieves 20% energy conversion.  This is a first for copper plated solar cells in Taiwan, where production can reach 200 solar cells per hour.  The efficiency of the solar cell will increase by 0.2% with the cost reducing by 5-7%.

Increased Rating of Copper Plating

Many foreign manufacturers have been developing copper plating technology themselves but no one has so far been able to produce copper plated solar panels on such a large scale.  This could, therefore, be a large profit making scheme for Taiwan, also making them leaders in the global copper plated solar cell market.  Currently, they are the world’s second largest solar cell market, but with the industry now stable and demand rising, this could easily change.  So, will we be seeing these copper plated solar panels in Britain any time soon?

Why Choose Copper Plating?

Copper plating is functional and it looks good.  Copper plating is very bright and eye catching.  It naturally kills bacteria and is often used for decorative purposes.  Copper plating has a smart, polished copper-pink finish and can be lacquered to prevent tarnish from occurring.  But the best reason for it being used as a solar panel is due to it being such an excellent conductor.

NiTEC UK and You

If you or your business are interested in copper plating, or any other plating methods, such as electroless nickel plating or diffused nickel plating or heat treatment, then contact NiTEC UK today.  We are Derbyshire based, leading specialists in the plating industry who can offer you a wide range of well-developed, tried and tested techniques which are very high-spec and are also cost effective.  We have experience of working for the aerospace, medical, army and automotive industries, to name but a few and offer our services to the UK, Germany, France, Brazil and Holland.  Call us today on 0845 224 3571 or alternatively you can email us at info@nitec-enp.co.uk

Why Choose Electroplating?

copper-electroplating-nitecElectroplating is a modern form of metal finishing.  It is commonly used in the automotive, aerospace, medical, army and electrical industries.  It occurs by means of an electrochemical process when metal ions in an electrolyte solution bond to a metal substrate through electrodeposition.   The required metal component is suspended in solution, whereby a direct power supply provides a direct flow of current to the said metal component in the chemical bath.  This current provokes the ions in the solution to attract to the surface of the metallic part, resulting in a metal coating which covers the base metal thoroughly.

Electroplating Benefits

Electroplating is mainly done in order to enhance the performance and longevity of the component part in question.  Certain characteristics can be added to the part in order to create specific needs for the manufacturers.  These can include areas such as:

  • Lower friction through greater lubrication
  • Better wear, abrasion and corrosion resistance
  • Temperature and impact resistance
  • Improved conductivity
  • Improved solderability
  • Porosity reducing
  • Creating added strength and hardness to the component
  • Creating a thicker appearance to smaller or undersized components
  • Increased protection for EMI and RFI shielding

Common Plating

Plating facilities match base metals with a wide array of coating surface metal finishes.  The most commonly used in this field are copper, brass, nickel, steel and bronze.  In order to decide which surface metal is used to coat for the finish, the components uses are highly considered so that the manufacturer can get the highest performance and longest lasting component part electroplated.

As examples:

Gold plating is the perfect solution for electrical conductivity, heat protection and corrosion and can survive in a multitude of environments and temperatures.

Silver plating is commonly used in the electrical industry dues to its low electrical resistance.

Nickel plating is ideal for the chemical industry.  It protects against chemicals and is corrosion and wear resistant.

Copper plating is most commonly used in the automotive industry.

Contact Us Today at NiTEC UK

If you or your business are interested in plating, be it electroless nickel plating or copper plating or heat treatment which may require specialist assistance, then get in touch with NiTEC UK?  A Derbyshire based company, we are leading specialists in the plating industry offering a wide range of well-developed, tried and tested techniques which are high-end and also cost effective.  We have experience of working for many different industries, including the aerospace, medical, army and automotive industries, to name but a few.  We offer our services to the whole of the UK, Germany, France, Brazil and Holland.  Call us today on 0845 224 3571 or alternatively you can email us at info@nitec-enp.co.uk

 

Nickel Plating and the Heatsink Saving

diffused-nickel-plating-company-coatingTechnical Giants, Thermalright, have recently announced their latest heatsink, multilingual Le Grand Macho.  It is an upgraded, amended version of the pre-existing HR22, which is more economical for buyers whose budgets cannot quite stretch to the HR22.  It is made up of three different types of metal, which include aluminium, pure copper and nickel plating.  It has been designed to replace an active stock Intel heatsink during passive operation, making sure that there is sufficient air flow provided.  When it is paired with a fan, the duo work together to dissipate 300W of heat and the copper base creates compatibility with a large array of different processors, including Intel.  This new heatsink model is soon to be available in the UK and can be chosen in silver and anodised black finish.

Nickel Plating Information

There are two types of Nickel PlatingElectroless Nickel Plating (ENP) and Diffused Nickel Plating.

Diffused Nickel Plating is a simple process which is the most effective nickel coating and ensures a high level of resistance against corrosion due to its total encapsulation method of plating.  It has been proven that the corrosion resistance is more effective than that of the highest grade stainless steel, whilst at the same time being much cheaper.  Diffused Nickel Plating is the perfect plating method for marine and salt environments, so much so that it is given 30 years sub-sea guarantee.

In a similar way, Electroless Nickel Plating is a high quality, cost effective metal coating solution which can substantially extend the life of components.  It also is extremely well resisted against corrosion and used frequently in the marine, oil and defence industries.    Electroless Nickel Plating aids the prevention of rust, wear and friction.  It can be hardened, too, by the use of heat treatment and it is guaranteed that it will not chip or flake, like paint or varnish can do.

Diffused Nickel Plating and Electroless Nickel Plating

What is different between the two methods of Nickel Plating, is the way in which the processes are undertaken.  It has already been deciphered that Diffused Nickel Plating occurs via a total encapsulation plating method but this is not the same for Electroless Nickel Plating.  This occurs when a layer of metal is deposited of even thickness all over the surface of a component, despite the shape of it.  This uniform coating is perfect for components which are used in industries, such as, Healthcare, Defence, Automotive and Aerospace, where the components are often not standard and need to be hygienic.

Contact NiTEC UK Today

If you or your business are interested in plating, be it electroless nickel plating or diffused nickel plating or heat treatment which may require specialist assistance, then why not get in touch with NiTEC UK?  A Derbyshire based company, we are leading specialists in the plating industry offering a wide range of well-developed, tried and tested techniques which are only high-end and also cost effective.  We have experience of working for a large array of industries, including the aerospace, medical, army and automotive industries, to name but a few.  We offer our services to the whole of the UK, Germany, France, Brazil and Holland.  Call us today on 0845 224 3571 or alternatively you can email us at info@nitec-enp.co.uk

First Class Copper Plating

copper-plating-derby-university-nitec-ukFor over two years, an old office in Derby had been left empty and lifeless but is now the centre of the hustle and bustle.  This is due to the fact that it is now home to Derby University’s Law and Criminology Department.  It is a building which cannot be missed as it is such a distinctive, beautiful and abnormal colour.  It is a six storey, 32,000 square foot expanse with an exterior of copper plating.  Originally, it was built as office in order to create around 700 jobs, as a £20 million project, but this architectural beauty, now named, One Friar Gate Square, failed to attract the businesses it was intended for.  The intended space had to be changed so that the layout was amenable and usable for the university staff and students, so it now has a number of specialist rooms relating to Law and Criminology, including an open plan specialist law library, lecture theatres and two fully compliant Court rooms Magistrates and Family Court – and all of this is inside a shell of copper plating!

A Little More About Copper Plating

Copper plating is both functional and aesthetically pleasing.  Copper plating is very bright and eye catching.  It has excellent levelling properties, naturally kills bacteria and is often used for decorative purposes, such as the Derby University building.  Copper plating has a smart, polished copper-pink finish and can be lacquered to prevent tarnish from occurring.

NiTEC UK and You

If you or your business are interested in copper plating, or any other plating methods, such as electroless nickel plating or diffused nickel plating or heat treatment, then why not contact NiTEC UK?  We are Derbyshire based, leading specialists in the plating industry who can offer you a wide range of well-developed, tried and tested techniques which are very high-spec and are also cost effective.  We have experience of working for the aerospace, medical, army and automotive industries, to name but a few and offer our services to the UK, Germany, France, Brazil and Holland.  Call us today on 0845 224 3571 or alternatively you can email us at info@nitec-enp.co.uk

 

 

Nickel Plating takes precedence in new DIY Water Cooling Kit

Thermaltake_fans_nickel_plating_cooling_NiTECClosed-loop water cooling kits are often used in computers or gaming PCs but do not have the greatest of reputations when it comes to safety, though they may be convenient.  Instead, enthusiast are using custom kits due to their performance and the fact that they can customize them to be just as they need them to be.  The new Thermaltake Pacific R360 D5 water cooling kit seems to be a great hit so far this year, because it has everything enthusiast builders need, and everything is all in one box!

DIY Water Cooling Kit in a Box

Inside this Pandora’s box of goodies (for some of us) you will find:

  • A CPU water block – has a copper base an anti-corrosive nickel plating. Block is claimed to fit all modern CPU sockets
  • A D5 pump and reservoir
  • A 360mm slim radiator
  • Six Compression fittings
  • Three Ring 12 LED blue radiator fans – hydraulic bearing and anti-vibration mounting system. This also aids the aesthetics as well as make the cooler quiet.
  • A length of tubing
  • Thermaltake 1000 Blue Coolant
  • Extra accessories – often ordered extras to improve the external appearance of the water cooling kit.

 

What does Nickel Plating do?

The CPU water block has a base made out of copper and anti-corrosive nickel plating.  What does nickel plating do to help?  Due to it being so corrosion resistant, its life is drastically extended, which means that part replacement occurs much less frequently than with other coating types, materials or if left uncoated.  Rust is unable to form where nickel plating has occurred and therefore the quality of the components is improved.  Nickel plating is great because it deposits itself evenly over a surface which not only looks nicer aesthetically, but it also makes the component a lot more durable and hard wearingNickel plating is the perfect solution for components which a subjected to a high amount of friction, wear or use and if it is treated properly, with the appropriate heat treatment, it will not chip or flake either like a top coat of paint or lacquer does.

 

Contact NiTEC UK Today

If you or your business are interested in plating, such as electroless nickel plating or diffused nickel platingheat treatment or have a special project which requires specialist assistance, then why not contact NiTEC UK?  We are Derbyshire based, leading specialists in the plating industry who offer a wide range of well-developed, tried and tested techniques which are not only high-end but also cost effective.  We have experience of working for the computing, aerospace, medical, army and automotive industries, to name but a few and offer our services to the UK, Germany, France, Brazil and Holland.  Call us today on 0845 224 3571 or alternatively you can email us at info@nitec-enp.co.uk

 

Whisky Sipping in Space Thanks to Plating

Gold-plating-aerospace-plating-NiTECDue to inspirational Physics developments, it is now possible for astronauts to drink Whisky in Space.  The activity of visiting to space may be a dangerous one but at the end of each day, the astronauts can rest easy when they are assured that they can have a ‘real’ drink, which isn’t out of a plastic bag.  Apparently, this is one of the most common complaints from the International Space Station (ISS) crews that they miss their familiar Earth-like environment back home.

Plating in the Solution to the Problem

On hearing this, Ballatine’s therefore addressed this by commissioning an Open Space Agency team, led by James Parr, in order to create an innovative, microgravity glass which would enable the astronauts in question to enjoy a glass of whisky, just as they would with their feet on the Earth.  Ballatine’s Space Glass looks like a regular whisky glass but has special, particular features allowing liquid to enter the glass, stay in the glass and which allow sipping.

It has been studied for over a year as to how whisky behaves in a zero gravity environment by building a series of prototype glasses to test their theories.  The final result is something that somewhat resembles a Don Draper balloon glass but which is made out of 3D printed plastic and has a weighted rose-gold plated spiral convex base which sits perfectly in the holders hand.  Its weight comes from the 10kg pull magnet, giving the glass some inertia, anchoring it to the table when in zero gravity.  The base also contains a clever, one-way valve to fill the glass using a standard Ballantine’s whisky bottle, in order to stop the whisky from spilling.

Gold Plated Glasses

The reason as to why the Space Glass has been gold plated was partly due to the aesthetics with the gold plating matching the plating used on the astronauts’ sun visors on their spacesuits.  But the gold plating was also used because it is one of the very few metals which does not affect the taste of the whisky when in Space.

How does Gold Plating help drinking in Space?

When liquids are in Space, they tend to turn in to a sticky jelly, so to counteract this from happening with the whisky, a spiral in the glass creates surface tension which holds it down.  The side of the glass contains a helix with a small channel concealed inside it which picks up the whisky in a capillary action, pulling it up to a gold plated mouthpiece on the rim of the glass.  Why a gold plated mouth piece you may well ask?  This is for multiple reasons – Firstly, so that the astronaut can physically see where their lips are meant to be placed so that they are over the concealed channel exit point and they know where to put their lips.  Secondly, the gold cools the alcohol as it passes through the mouthpiece.  Thirdly, gold plating and not metal plating of any other kind, means that there is no nasty after taste left in the mouth of the drinker and the texture of drinking out of what (at the end of the day) is a plastic beaker, is concealed.

NiTEC UK and You

If you or your business are interested in plating, such as electroless nickel plating or diffused nickel platingheat treatment or have a special project requiring specialist assistance, then why not contact NiTEC UK today?  We are Derbyshire based, leading specialists in the plating industry, offering a wide range of well-developed, tried and tested techniques which are not only high-end but are also cost effective.  We have experience of working for the aerospace, medical, army and automotive industries and offer our services to the UK, Germany, France, Brazil and Holland.  Call us today on 0845 224 3571 or alternatively you can email us at info@nitec-enp.co.uk

 

What to Consider before you Electroplate

tin-plating-company

Are you thinking about having parts electroplated?  Here are the most important things you need to take in to consideration before and during the process…

What should you consider Pre Electroplating?

 

  • Nesting

Electroplating involves electrical and chemical reactions on the surface of the part you are wanted to be plated, so exposure is crucial to the result of the final product.  Parts which are nesting will lack adhesion and therefore coverage on the final product.

  • Tolerance

The tolerance on vital dimensions on the part in question should be designated with the plating thickness in mind.  This is should be accounted for when the pieces are ready for assembly after the products have been through the chemical process.

  • Environment and exposure

What is your product going to be exposed to?  A high amount of friction, heat or sea spray?  This is essential for negotiating the thickness of the necessary plating required to maintain the resistance, corrosion and rust protection of the part in question.

  • Geometry

Electroplating involves using a current in order for the reaction to be initiated on the surface of a part, which means that the geometry of the parts surface will influence the distribution of electroplating across the surface.  This is called current density.  It is normal that plating builds up in parts which have sharp corners, bends and threads but it can be prevented if specialists use advanced plating processes.

  • Drainage

The preparation of the surface of a part needing plating must be correct so that the inside surfaces of a part will be sufficiently covered when the process is completed.  This is so that the plating will have the correct bond strength for plating to have been carried out correctly and for the part to have ultimate protection and increase its longevity.  This, for some parts, may mean they need to have a weep hole create during their design phase, so that this can be achieved.

  • Usage

It must be clear what your intended use is for the part you are needing plating.  Make it clear to your specialists what the use and required characteristics are of the part.  Important features include conductivity, low friction, high strength, corrosion resistance, wear, exposure to sea spray or water etc.  This will determine which metal your part is made from (eg. Copper, Nickel, Tin, etc), how your part should be finished and plated.

 

NiTEC UK and You

 

NiTEC UK are a Derbyshire based company and we are leading specialists in the plating industry.  We offer an array of well-developed, high-end techniques which are cost effective and reliable.  We have extensive experience working for industries, such as aerospace, medical, army and automotive and offer our services to the UK, France, Germany, Holland and Brazil.  If you need plating services such as electroless nickel plating, copper plating or heat treatments, then contact us today by calling our friendly and professional team on 0845 224 3571, email us at info@nitec-enp.co.uk or alternatively you can click here to be taken directly to our website and view the services we offer for yourself.

 

Electroplating from the Start

electroless-nickel-plated-componentElectroplating is a form of metal plating which is used by many industries in a range of capacities which include the aerospace, automotive, army, space, medical, electronic and engineering sectors, to name but a few.  It is useful due to the fact that it is so versatile and lends itself so because of its electrochemical process where metal ions in solution are bonded to metal substrates by means of electrodeposition.

Before Electroplating

Pre Electroplating, all parts must be thoroughly cleaned and then a process of chemical baths must be followed so that the parts can be prepared and activated so that the adhesion for the strong bond can take hold and become effective.  This is key in the electrodeposition process.  Many variables must be monitored closely during the electroplating bath process, such as the power supply which provides a direct flow of current to the parts in submerged.  This enables ions to be attracted to the surface of the metallic part evenly.  Every mole of electrons that are transferred to the part, allows one mole of metallic ions in the solution to adhere to the part during the bath process.  A chemical reaction can subsequently occur where the reduction and oxidation of ions takes place.

Types of Electroplating

Specialist plating facilities are able to plate a large array of different base materials to protect various surfaces.

Base materials for electroplating include:

  • Brass
  • Copper
  • Nickel
  • Stainless Steel
  • Nickel Silver

Surface finishes for electroplating include:

About Electroless Nickel Plating

Electroless nickel plating is a high quality but cost effective coating solution which can drastically extend the life expectancy of a stainless steel component.  This is due to the metal layer deposited by the electroless nickel coating creating an even thickness across the components surface, despite its shape.  This makes electroless nickel plating very popular in sectors such as the defence, health, automotive and aerospace industries.

NiTEC UK and You

NiTEC UK are a Derbyshire based company in the UK and are leading specialists in the plating industry.  We offer a large array of well-developed high-end techniques which are cost effective and readily available for you.  We have extensive experience of working for industries, including that of the aerospace, medical, army and automotive sectors and offer our services to the UK holistically, France, Germany, Holland and Brazil.  So, if you are interested or are in need of plating, such as electroless nickel plating, copper plating or heat treatments, then contact us today by calling our friendly and professional team on 0845 224 3571, email us at info@nitec-enp.co.uk or alternatively you can click here to be taken directly to our website and view the services we offer for yourself.

The Future’s Bright, The Future’s NiTEC

LED_lights

2008 saw the beginning of the EU process which took four years to put in to place, preventing incandescent light bulbs from being sold.  This was because they performed inadequately and were not eco-friendly due to the high amount of electricity they consumed.  The LED has therefore taken its place on our supermarket shelves, as they are proven to be much more efficient.

Plating Industries

The electronic and automotive industries, as well as most British households and road engineers for road lighting applications, are using LED lights.  The LED substrate can be silver plated either conventionally by rack or less conventionally by reel-to-reel plating procedures.  Plating differs depending on the thickness, and ranges from 20 to 150 A/dm², normally.

Bright Lights

How are LED lights so bright?  This is due to a low free-cyanide silver process which contains brightener additives.  This creates high luminosity.  These LEDs are much more eco-friendly, cost effective and use a fraction of the amount of electricity of an incandescent light bulb.

Heat Treatment gets the Deep Treatment

The silver deposits used to plate the LEDs were initially heated for 60 minutes at 200° and then for 120 minutes at the lower temperature of 170°C but it was quickly identified that significant reflectivity was lost during this.  So it was decided that a post-dip was going to be used in order to prevent the reflectivity loss, in the form of an aqueous treatment post heat treatment.  This seems to have worked, having been tested on multiple different types of nickel, at higher temperatures and with the nickel being treated for shorter lengths of time (up to 1 minute), as the GAM measurements do not diminish dramatically at all.  Thus, proving the effectiveness of the combination of plating, heat treatment and the post-dip aqueous treatment as a trio.

Contact NiTEC UK Today

If you or your business are interested in plating, such as electroless nickel plating or diffused nickel plating, heat treatment or have a special project which you require specialist assistance with, then why not get in touch with NiTEC UK?  We are Derbyshire based, leading specialists in the plating industry who can offer you a wide range of well-developed techniques which are not only high-end but also cost effective.  We have experience of working for the aerospace, medical, army and automotive industries, to name but a few and offer our services to the whole of the UK, Germany, France, Brazil and Holland.  Why not get in touch with us today on 0845 224 3571 or alternatively you can email us at info@nitec-enp.co.uk

Plating to Perfection

metal plating company OscarThey were first designed in 1928.  They are made in Chicago.  They are plated in copper, nickel and silver before being coated in 24-carat gold.  What are we talking about?  An Oscar!

These 14 inch, 8.5 pound statuettes are the literally the definition of perfection in more ways than one.  If they are not perfect, then the makers are lead to starting the statuettes from scratch, time and time again.  But once they are deemed perfect, they are guaranteed for life!  The iconic Art Deco Academy Award takes a long 10 days to repeat from start to finish, partly because there is only one Oscar mould and also because so many processes take place in their production, such as electroplating.

About the Oscar

It was designed by Cedric Gibbons, the MGM art director, who sketched the subjected standing on a film reel with five spokes.  These five spokes represent the original five branches of the Academy and was originally called the Academy Award of Merit.  Each Oscar is engraved with a serial number and now over 3,000 Oscars have been awarded.  These Oscars may begin their lives in Chicago but one classified as ‘perfect’ are packaged and flown, with guards, to Los Angeles for the award ceremony.  An interesting fact about Oscars is that although they are guaranteed for life, if they are damaged, an actor can send them back and have them either replaced or restored to their former glory.  They are meant to be priceless objects and there is an act to say that they are not resalable.  However, this electroplated objects of splendour have continued to be traded in the shadows with some of the highest sales exceeding $250,000 and Michael Jackson paid $1.5million for a Best Picture award for Gone With The Wind 1939 in 1999.

Find Out More About NiTEC UK Today

If you are interested in finding out more about any of the plating processes which you have read about in this article, such as copper plating, electroless nickel plating or diffused nickel plating, then why not get in touch with NiTEC UK today?  We are leading specialists in the plating industry based in Derbyshire, England, and offer an array of developed techniques which are both high-end and cost effective.  We work in the aerospace, automotive and medical industries to name but a few and we offer our services to the UK, France, Holland, Brazil and Germany.  So if you need plating done to perfection, call us today on 0845 224 3571 or alternatively email us at info@nitec-enp.co.uk

Witches on a Silver Platter

witch-silver-plating

Products that have been silver plated have the highest conductivity of all metals.  Their best attributes are that they can be used for soldering, are corrosion resistant, are durable, are wear resistant and can be used by an array of consumers for many different reasons, such as electronics, jewellery and in the automotive industry.

The Golden History of Silver

Silver Plating was historically used in ancient civilisation where the noble metals where seen as objects of great beauty.  They were believed to contain the mystic qualities of distant heavenly bodied.  Gold was seen symbolically as the sun and silver as the moon and the Ancient Egyptians called silver “white gold”.  The most famous mythical attributes of silver are its powers against enchantment and it is thought to contain powers against witches and vampires in other cultures, too.

How Did Silver Plating Occur?

Silver plating was originally used because it was a cheaper equivalent to the use of solid gold, usually in the home, for decorative objects, such as cutlery and candlesticks.  The earliest type of Silver plating was Old Sheffield Plate but in the 19th Century new methods were introduced, such as electroplating.

Silver Plating

Silver plating occurs when Silver cyanide is used in the electrolyte, as opposed to other compounds of Silver such as Silver Nitrate because the cyanide ion reacts with the Silver ion, forming a complex ion, limiting the supply of free Silver nitrate ions in the solution.  This enables them to deposit themselves on to the cathode creating a shiny and adherent silver plating available and great for use in many industries.

The benefits of Silver plating are:

  • That it is very soft
  • Has very low shear strength
  • Acts as a solid lubricant
  • Has low friction (it’s lowest when it is dry)
  • That is doesn’t oxidise particularly at temperature (good for exhausts)
  • Doesn’t need lubricant
  • Can be made in to a paste to perform as a lubricant, known as ‘silver-doped paste’ (for industrial usage)
  • Used for soldering
  • Corrosion resistant
  • Durable
  • Wear resistant

Who or which Industries reap the benefits of Silver plating?

  • Electronic
  • Costume Jewellery
  • Industrial
  • Telecoms
  • Automotive
  • Fasteners
  • Decoratively

NiTEC UK, Your Specialist Plating Company

NiTEC UK are leading specialists in the plating industry and specialise in electroless nickel plating based in Derbyshire, England. We have a wide range of developed techniques available to provide high-end, cost effective services for you.  We have considerable experience working with companies in the automotive, aerospace and military industries and offer our services to the UK, France, Holland, Brazil and Germany.

Contact NiTEC UK today

If you are interested in finding out more about our alternatives to Silver plating, such as electroless nickel plating, Copper plating or Tin plating, then why not get in touch with our friendly and professional team today?  Contact us on 0845 224 3571, email us at info@nitec-enp.co.uk or alternatively click here to go directly to our website to explore for yourself.

 

 

ABCD – Aluminium, Boron, Coating, Diamonds

Over the last decade, the demand for aluminium moulds has increased dramatically but consistently and apparently this shows no sign of slowing down, changing or ceasing all together.  Metal coatings are provided for a range of fabricated metal components, but the largest business currently is mould coating and plating.  Specifically the demand for aluminium itself is increasing.  This is because companies have begun to discover that that aluminium moulds can last longer, much longer, than what they were predicted.  The extra longevity of the aluminium moulds can be enhanced further if buyers opt for the mould to be plated with electroless nickel.  This is a cost effective way to extend the life of aluminium tooling and has become extremely popular with automotive suppliers.  Alternatives to aluminium coating or plating can be nickel boron plating and nickel diamond plating which are also popular but aluminium remains the optimum and is only set to continue growing in demand.

Nickel Boron Plating

Nickel boron is a surface deposit coating that can be applied to many different metals including stainless steel, aluminium and titanium.  It acts as a great alternative to chrome plating and has many benefits, which include extending wear and corrosion resistance.  The nodular structure of nickel boron reduces drag in aerodynamic and fluids in circumstances such as ship propellers, down-hole oil crude oil pumping equipment, automotive and truck transmissions and greaseless guns.

Nickel Diamond Plating

Nickel Diamond Plating is where electroless nickel deposits are combined with particles of diamonds.  Many substrates can be coated using this method such as carbon, aluminium, stainless steel and alloys.  Substrates, once coated in this, become extremely highly corrosion and wear resistant and therefore have a much increased lifespan.  Part maintenance and replacement costs are reduced dramatically, as are the costs for such.  This is a popular technique in industries such as textile industry, wood working tools, computer parts, paper handling equipment, automotive water pumps, chemical process pumps and gage blocks.nickel-diamond-plating-nitec

NiTEC UK, the Specialist Plating Company

NiTEC UK are leading specialist in the plating industry, specialising in electroless nickel plating and are based in Derbyshire, England.  We have a wide range of developed techniques available to provide high-end and cost effective services for you.  We have a great deal of experience working with companies in the automotive, aerospace and military industries and offer our services to the whole of the UK, France Holland, Brazil and Germany.

Call NiTEC UK today

If you are interested in finding out more about electroless nickel plating, nickel boron plating or nickel diamond plating, then why not get in touch without friendly and professional staff team today?  Call us today on 0845 224 3571, email us at info@nitec-enp.co.uk or you can go directly on to our website by clicking here.

Electroplating and Electroless Plating – Less is More!

less-is-more-electroless-nickel-plating

The success of many products, which a lot of us are probably unaware of, are dependent on the application of surface engineering.  Such a huge amount of products, both commercial and industrial, are needy of it.  These include aeroplanes, computers, cars, trains, buildings, medical implants, mobile phones, and electronic devices – what would you do for a week without having just the products that have been listed?

The Electroplating Process

Electroplating is a process of surface engineering.   This is where metal coating is applied to a metallic or other conducting surface by and electrochemical process.  This process uses electric current in order to form a coherent coating on an electrode.  Electroplatings number one use is to change the surface properties of an object, such as the wear resistance, lubricity, corrosion protection and abrasion, for example.  It also builds up the thickness on objects, too.

The Electroless Plating Process

Electroless plating is a high quality, cost effective and eco-friendly solution to coating metals like stainless steel, as it can dramatically enhance the life expectancy.   The main difference between electroplating and electroless plating (yes, is in the name!) is that no electricity is used in the process of electroLESS plating.  Electroplating baths are used and are closely monitored as the parts must have a constant power supply directly provided to them in order for the ion attraction to be initiated in the bath contained solution on to the metallic surface of the submerged object.  This is when the chemical reaction occurs as the ions are being reduced and oxidised.

What does Plating help with?

  • Creates adhesion
  • Creates even coverage
  • Can add thickness to plated object
  • Weep holes can be added for drainage
  • Plating can carried out on many types of metal including electroless nickel plating
  • Conductor
  • Has low friction
  • Adds strength
  • Corrosion resistant
  • Makes objects hard wearing

Electroless Nickel Plating

NiTEC are experts in Electroless Nickel Plating, also known as ENP.  We are leading suppliers in Derbyshire who perform the electroless nickel plating process as well as many other processes to the highest of specifications to suit your needs.  We undertake diffused nickel plating, copper plating, nickel diamond plating, tin plating and many other processes.  If you are interested in these processes and want to ask us to perform these processes for your company or wish to find out more information then why not contact us today.  Call our highly respected staff on 0845 224 3571, email us at info@nitec-enp.co.uk or you can go directly to our website by clicking here to find out more about whichever process you desire.

 

Choose the Right Coating to Maximise Product Optimisation in the Automotive World

The idea of a specialised coating is for the surface of metals to be permanently enhanced by them.  This can be used on other substrates as well and on many components and equipment, too.  These specialised coatings, in effect, act as a deterrent and solve wear, corrosion, lubricant and release problems.   But to choose the best coating for you, the most important things which must be taken in to consideration is the operating environment.

Put a Coat on!

Surface coating usage has grown enormously in the automotive industry over the last fifty years.  Initially, the internal combustion engine was usually manufactured from cast iron, forged steels and die-cast aluminium alloysHeat treatment provided the wear surface for these elements along with white metal or bronze bearings.  They were oiled and lubricated to allowance clearance between moving surfaces.  Half a century later, this method is still used today, though we need and expect more out of our cars.  We expect them to last longer, drive considerably more substantial distances and we need them to abide by our emissions regulations now, too – no mean feat!  In case that wasn’t enough, we expect our cars to do all of this with less fuel and lighter engines which have a lower tolerance to engineering and lower friction between their moving parts.  Due to this, a wider range of materials and coating variety have been required by us all, so that the wear, corrosion and friction problems and expectations could be overcome.

Automotive Parts and Protective Coatings

Piston rings, skirts and pins are coated frequently by hard-wearing, low friction coatings.  This is to hengine-block-nitecelp the initial running-in and advocates long-life performance.  It also helps with lower oil lubrication levels which are commonly associated with cold engine starts and reduces the amount of lubricant allowed to enter the combustion chamber.  Ceramic coatings provide the thermal insulation of piston crowns, usually in diesel engines, where increased and high temperature thermal spray or vacuum use methods are often practiced.

Mating cylinder linings can be coated with electrolytic or electroless plated composite finished which incorporate hard particles of silicon carbide, diamond or boron nitride.  The engines design and performance influence are what enable the design engineer to make the coating choice.

Bio fuels have caused a large amount of corrosive issues with the fuel input systems, fuel storage and fuel delivery systems.  There are a great array of thin coatings which can be applied to these areas in order to prevent corrosion from occurring such as electroless nickel plating which is often enhanced with the use of powder coating or e-coat top coats.

Contact NiTEC UK

NiTEC UK are leading suppliers who are experts in electroless nickel plating.  We are a Derbyshire based company who undertake many processes to the highest spec for you.  These include diffused nickel plating, shot blasting, nickel boron plating, nickel diamond plating and so much more.  So, if you are interested in finding out more about these processes then give our friendly and professional staff a call on 0845 224 3571 or email us at info@nitec-enp.co.uk.  Alternatively, you can click here and go directly to our website to find out more about us and our processes.

 

The 3 P’s – Plating, Process and Products

After only a couple of decades, the metal finishing world has been transformedElectroplating is the most modern form of metal finishing which is used in a wide array of industries such as aerospace, automotive, healthcare and military defence, to name but a few.  During this electrochemical process the metal ions in solution are bonded to a metal substrate via the process of electrodeposition.

Pre-Electroplatingletter-p

Before electroplating was a front runner in the metal finishing world, parts had to be properly cleaned before entering a series of chemical baths to prepare and activate in order to prepare and activate the metal to create strong adhesion created during the process of electrodeposition.

The Plating Process

Electroplating baths involve multiple variables and components which must be closely monitored constantly.  The parts have a constant power supply provided directly to them which initiates the ion attraction in the solution towards to metallic surface.  Every time a mole of electrons is transferred to the part in question, one mole of metallic ions in solution adhere directly to the part as well.  Whilst this happens a chemical reaction also occurs on the surface of the part which includes ions being reduced and oxidised.

What do you need to consider before electing to use Electroplating?

  • Because electrical and chemical reactions are both involved in the electroplating process, exposure is critical to the finished product. The nesting of parts will create a lack of adhesion and lack of coverage which should be avoided.
  • Plating thickness should be kept in mind when dimension tolerance is designated and the extra room for electroplating should be left so that parts fit together after the process has occurred.
  • What environment are the parts going to be exposed to? This will help you to decide what level of thickness you will require in order for your part to be made corrosion proof.
  • The geometry of the part in relation to the current distribution aka current density, across the surface of a part. Plating builds up on sharp corners, bends and threads for example.
  • Do you need to think about the drainage of plating solutions the addition of a weep hole may need to be added during its design phase in order for it to be successful.
  • Think about the type of metal you should be using in relating to the job you want it to do for you! What characteristics do you need the surface to have for the job in question?  Does it need to be a conductor, have low friction, be strong, corrosion resistant, hard wearing etc?  This should make you therefore lead you in to thinking about the types of plating which would be effective – Gold plating, Silver plating, Nickel plating or Copper plating

Electroplating Suppliers at Your Convenience

NiTEC UK are a Derbyshire based company, who are experts in the Electroless Nickel Plating process or ENP.  If you are interested in finding out about Electroless Nickel Plating or other process we supply, such as Diffused Nickel plating, Shot blasting or Heat Treatment, then why not give us a call on 0845 224 3571.  Alternatively, you could get in touch with our friendly and professional staff via email at info@nitec-enp.co.uk or click here to go directly to our website to extensively discover our services.