Archive for Electroless nickel applications

The Future’s Bright, The Future’s NiTEC

LED_lights

2008 saw the beginning of the EU process which took four years to put in to place, preventing incandescent light bulbs from being sold.  This was because they performed inadequately and were not eco-friendly due to the high amount of electricity they consumed.  The LED has therefore taken its place on our supermarket shelves, as they are proven to be much more efficient.

Plating Industries

The electronic and automotive industries, as well as most British households and road engineers for road lighting applications, are using LED lights.  The LED substrate can be silver plated either conventionally by rack or less conventionally by reel-to-reel plating procedures.  Plating differs depending on the thickness, and ranges from 20 to 150 A/dm², normally.

Bright Lights

How are LED lights so bright?  This is due to a low free-cyanide silver process which contains brightener additives.  This creates high luminosity.  These LEDs are much more eco-friendly, cost effective and use a fraction of the amount of electricity of an incandescent light bulb.

Heat Treatment gets the Deep Treatment

The silver deposits used to plate the LEDs were initially heated for 60 minutes at 200° and then for 120 minutes at the lower temperature of 170°C but it was quickly identified that significant reflectivity was lost during this.  So it was decided that a post-dip was going to be used in order to prevent the reflectivity loss, in the form of an aqueous treatment post heat treatment.  This seems to have worked, having been tested on multiple different types of nickel, at higher temperatures and with the nickel being treated for shorter lengths of time (up to 1 minute), as the GAM measurements do not diminish dramatically at all.  Thus, proving the effectiveness of the combination of plating, heat treatment and the post-dip aqueous treatment as a trio.

Contact NiTEC UK Today

If you or your business are interested in plating, such as electroless nickel plating or diffused nickel plating, heat treatment or have a special project which you require specialist assistance with, then why not get in touch with NiTEC UK?  We are Derbyshire based, leading specialists in the plating industry who can offer you a wide range of well-developed techniques which are not only high-end but also cost effective.  We have experience of working for the aerospace, medical, army and automotive industries, to name but a few and offer our services to the whole of the UK, Germany, France, Brazil and Holland.  Why not get in touch with us today on 0845 224 3571 or alternatively you can email us at info@nitec-enp.co.uk

Boeing up in the World

Boeing_777_electroless_nickel_plating

 

 

 

 

 

 

 

The famous aeroplane makers, Boeing, have found what seems to be the “Lightest Metal Ever” known as microlattice.  This is a material which is 99.9% air!  Developed in California, it is a way for planes and even rockets to have their weight reduced.  This 3D open cellular polymer structure will reduce the amount of fuel a plane needs to use during take off, flying and landing.  Currently, Boeing are looking in to using this structure internally on their planes in areas such as the overhead compartments, under the floor and in other fixtures to create a modern internal environment for passengers.

Boeing and Electroless Nickel Plating

Researchers decided that the 3D open cellular polymer structure should be coated with electroless nickel plating, in order to give the structure the required strength, because the web of nickel-phosphorus alloy lattice tubes are only just 100 nanometres thick.  The theory behind using this new structure coated with electroless nickel plating is a lot more advanced in the theory of aeronautical engineering, so has not been trialed yet for space-bound vehicles.  However, it is known that it would be used for exactly the same weight saving reasons to go to space, but also because it has the ability to compress, too, which could mean that objects sent in to space could expand after launch, reducing cargo hold space.  More, evidence will be needed though, before this is trialled as part of a space-bound launch, but nevertheless is a very exciting move forward in science.

Electroless Nickel Plating

Electroless nickel plating as a high quality, cost effective solution for metal coating, elongating the life of a component dramatically, because it leaves an equal thickness metal layer deposit all over the surface of a component, no matter what size or shape it is.  It is ideal for use in harsh environment as it is corrosion resistant, rust is prevented from forming and does not chip or flake which reduces the cost and frequency of repairs and replacement needed.  Electroless nickel plating can be hardened up to 950vhn, is self-lubricating and is non-magnetic.  These are just some of the advantages of electroless nickel plating.  If you would like to find out more then you can find out more by contacting NiTEC UK, the leading suppliers of electroless nickel plating.

Contact NiTEC UK Today

NiTEC UK are experts in the process of electroless nickel plating (ENP) and have a friendly and professional team who are more than happy to help you with any query you may have at any time.  If electroless nickel plating is something you or your business would like to find out more about, then please contact us on 0845 224 571, email us at info@nitec-enp.co.uk or alternatively you can click here to go directly to our website.  Our website contains information about other services we provide, such as diffused nickel plating, copper plating, shot blasting and heat treatment.

Plating to Perfection

metal plating company OscarThey were first designed in 1928.  They are made in Chicago.  They are plated in copper, nickel and silver before being coated in 24-carat gold.  What are we talking about?  An Oscar!

These 14 inch, 8.5 pound statuettes are the literally the definition of perfection in more ways than one.  If they are not perfect, then the makers are lead to starting the statuettes from scratch, time and time again.  But once they are deemed perfect, they are guaranteed for life!  The iconic Art Deco Academy Award takes a long 10 days to repeat from start to finish, partly because there is only one Oscar mould and also because so many processes take place in their production, such as electroplating.

About the Oscar

It was designed by Cedric Gibbons, the MGM art director, who sketched the subjected standing on a film reel with five spokes.  These five spokes represent the original five branches of the Academy and was originally called the Academy Award of Merit.  Each Oscar is engraved with a serial number and now over 3,000 Oscars have been awarded.  These Oscars may begin their lives in Chicago but one classified as ‘perfect’ are packaged and flown, with guards, to Los Angeles for the award ceremony.  An interesting fact about Oscars is that although they are guaranteed for life, if they are damaged, an actor can send them back and have them either replaced or restored to their former glory.  They are meant to be priceless objects and there is an act to say that they are not resalable.  However, this electroplated objects of splendour have continued to be traded in the shadows with some of the highest sales exceeding $250,000 and Michael Jackson paid $1.5million for a Best Picture award for Gone With The Wind 1939 in 1999.

Find Out More About NiTEC UK Today

If you are interested in finding out more about any of the plating processes which you have read about in this article, such as copper plating, electroless nickel plating or diffused nickel plating, then why not get in touch with NiTEC UK today?  We are leading specialists in the plating industry based in Derbyshire, England, and offer an array of developed techniques which are both high-end and cost effective.  We work in the aerospace, automotive and medical industries to name but a few and we offer our services to the UK, France, Holland, Brazil and Germany.  So if you need plating done to perfection, call us today on 0845 224 3571 or alternatively email us at info@nitec-enp.co.uk

ABCD – Aluminium, Boron, Coating, Diamonds

Over the last decade, the demand for aluminium moulds has increased dramatically but consistently and apparently this shows no sign of slowing down, changing or ceasing all together.  Metal coatings are provided for a range of fabricated metal components, but the largest business currently is mould coating and plating.  Specifically the demand for aluminium itself is increasing.  This is because companies have begun to discover that that aluminium moulds can last longer, much longer, than what they were predicted.  The extra longevity of the aluminium moulds can be enhanced further if buyers opt for the mould to be plated with electroless nickel.  This is a cost effective way to extend the life of aluminium tooling and has become extremely popular with automotive suppliers.  Alternatives to aluminium coating or plating can be nickel boron plating and nickel diamond plating which are also popular but aluminium remains the optimum and is only set to continue growing in demand.

Nickel Boron Plating

Nickel boron is a surface deposit coating that can be applied to many different metals including stainless steel, aluminium and titanium.  It acts as a great alternative to chrome plating and has many benefits, which include extending wear and corrosion resistance.  The nodular structure of nickel boron reduces drag in aerodynamic and fluids in circumstances such as ship propellers, down-hole oil crude oil pumping equipment, automotive and truck transmissions and greaseless guns.

Nickel Diamond Plating

Nickel Diamond Plating is where electroless nickel deposits are combined with particles of diamonds.  Many substrates can be coated using this method such as carbon, aluminium, stainless steel and alloys.  Substrates, once coated in this, become extremely highly corrosion and wear resistant and therefore have a much increased lifespan.  Part maintenance and replacement costs are reduced dramatically, as are the costs for such.  This is a popular technique in industries such as textile industry, wood working tools, computer parts, paper handling equipment, automotive water pumps, chemical process pumps and gage blocks.nickel-diamond-plating-nitec

NiTEC UK, the Specialist Plating Company

NiTEC UK are leading specialist in the plating industry, specialising in electroless nickel plating and are based in Derbyshire, England.  We have a wide range of developed techniques available to provide high-end and cost effective services for you.  We have a great deal of experience working with companies in the automotive, aerospace and military industries and offer our services to the whole of the UK, France Holland, Brazil and Germany.

Call NiTEC UK today

If you are interested in finding out more about electroless nickel plating, nickel boron plating or nickel diamond plating, then why not get in touch without friendly and professional staff team today?  Call us today on 0845 224 3571, email us at info@nitec-enp.co.uk or you can go directly on to our website by clicking here.

Electroplating and Electroless Plating – Less is More!

less-is-more-electroless-nickel-plating

The success of many products, which a lot of us are probably unaware of, are dependent on the application of surface engineering.  Such a huge amount of products, both commercial and industrial, are needy of it.  These include aeroplanes, computers, cars, trains, buildings, medical implants, mobile phones, and electronic devices – what would you do for a week without having just the products that have been listed?

The Electroplating Process

Electroplating is a process of surface engineering.   This is where metal coating is applied to a metallic or other conducting surface by and electrochemical process.  This process uses electric current in order to form a coherent coating on an electrode.  Electroplatings number one use is to change the surface properties of an object, such as the wear resistance, lubricity, corrosion protection and abrasion, for example.  It also builds up the thickness on objects, too.

The Electroless Plating Process

Electroless plating is a high quality, cost effective and eco-friendly solution to coating metals like stainless steel, as it can dramatically enhance the life expectancy.   The main difference between electroplating and electroless plating (yes, is in the name!) is that no electricity is used in the process of electroLESS plating.  Electroplating baths are used and are closely monitored as the parts must have a constant power supply directly provided to them in order for the ion attraction to be initiated in the bath contained solution on to the metallic surface of the submerged object.  This is when the chemical reaction occurs as the ions are being reduced and oxidised.

What does Plating help with?

  • Creates adhesion
  • Creates even coverage
  • Can add thickness to plated object
  • Weep holes can be added for drainage
  • Plating can carried out on many types of metal including electroless nickel plating
  • Conductor
  • Has low friction
  • Adds strength
  • Corrosion resistant
  • Makes objects hard wearing

Electroless Nickel Plating

NiTEC are experts in Electroless Nickel Plating, also known as ENP.  We are leading suppliers in Derbyshire who perform the electroless nickel plating process as well as many other processes to the highest of specifications to suit your needs.  We undertake diffused nickel plating, copper plating, nickel diamond plating, tin plating and many other processes.  If you are interested in these processes and want to ask us to perform these processes for your company or wish to find out more information then why not contact us today.  Call our highly respected staff on 0845 224 3571, email us at info@nitec-enp.co.uk or you can go directly to our website by clicking here to find out more about whichever process you desire.

 

The Importance of…Electroless Nickel Plating and the Benefits

You may be aware of Electroless Nickel (EN) plating, but do you know all about the process of EN and how it could help you in your industry?  This article informs you about the concentration ranges, the environmental legislation by which EN complies and flags up specific industries which it is now prevalent in.  Could Electroless Nickel plating help you?

Process This

The process of Electroless Nickel plating is autocatalytic – A controlled reaction between a nickel-phosphorous alloy and a metal or plastic substrate, electroless-nickel-plating-company-chesterfieldwithout the use of electric current or other external electrical power supply.  The metal being used in submerged in an aqueous solution called a bath, during this chemical reaction.  An agent within the bath, normally sodium hypophosphite, acts as a reducing agent, releases hydrogen, which reacts with the metals ions producing a negative surface charge.  This creates nickel alloy as a deposition on to the metal or plastic substrate.  This method is a reliable, repeatable typical thickness layer which is known to prevent the need for post-plate grinding.  Electroless Nickel plating is often thought highly of due to its mechanical properties, stabilities and brightness which the plating obtains.  This process also provides superior corrosion protection, solderability, lubrication and wear resistance.  Due to these reasons, it has been widely used in the Automotive, Aerospace, printed circuit board industry and Military fields and can be applied to a wide range of base materials such as aluminium, titanium, stainless steel, copper brass and die-cast zinc.  This shows the usage flexibility of Electroless Nickel plating, thanks to its three phosphorus concentration ranges: low (2-5%), mid (6-9%) and high (10-13%).  It is beneficial to these industries because it helps them comply with specific environmental legislations, such as End of Life Vehicle (ELV), Restriction of Hazardous Substances (RoHS), Environmental Protection Agency (EPA), and Occupational Safety and Health Administration (OHSA), to name but a few.

Anything Chrome Can Do, ENP Can Do Better

Electroless Nickel plating is now a good alternative for industries, such as Automotive, Aerospace, printed circuit board and Military, rather than chrome technology – It is more energy efficient, falls inside the engineering requirements and reduces the amount of hazardous waste matter introduced into the environment in comparison to chrome technology.

Electroless Nickel Plating Company, Derbyshire, UK

Here at NiTEC UK, we are experts in the process of Electroless Nickel plating. To find out more about our Electroless Nickel plating and other metal plating services, please call the NiTEC team on 0845 224 3571, email info@nitec-enp.co.uk or get in touch via our contact page.

Nickel Plating: The Perfect Metal Coating to Protect Brake Calipers from Corrosion and Wear

nickel plated brake caliperBrake calipers are one of the most important parts of the breaking system of a car. They are a necessity in the process that allows your car to stop, therefore it is essential for them to be hardwearing and long lasting. As vital parts of a car’s breaking system, calipers squeeze the brake pads against the surface of the brake rotor in order to slow or stop the vehicle.

How do Brake Calipers Work?

In a disc-braking system the car’s wheels are attached to metal discs, or rotors, that spin along with the wheels. The brake caliper’s job is to slow down the wheels of the car by creating friction with the rotors. The brake caliper itself fits over the rotor like a clamp, and inside it is a pair of metal plates which have been bonded with friction material called brake pads.

Corrosion and Wear Protection

Nickel plated coatings are excellent at protecting steel from corrosion and wear. Electroless nickel plating is used in a variety of applications to extend the life of components, therefore, it is the perfect metal plating technique for brake calipers. Brake calipers are also exposed to a variety of difficult environments, for example heat, cold, summer, winter, snow and salt. Therefore, a corrosion resistant coating on brake calipers is very important to ensure the longevity of the cars braking system.

Nickel Plating on Bumpers, Wheels and Grilles

Electroless nickel can also be used on the bumpers, wheels and grilles of a car. The use of nickel plating on parts such as these is partly due to the fact that it looks good with its shine and bright finish. But nickel also provides excellent corrosion resistance, durability and wear resistance, as is often demanded by makers of vehicles.

Nickel plating is the perfect solution to creating hard wearing, corrosion resistant brake calipers as a nickel coating is a very effective way of coating and protecting steel. If you would like to find out more about our electroless nickel plating and other metal plating services, why not ‘Like’ the NiTEC Facebook page or follow @nickelplating on Twitter for regular news, pictures and case studies. Alternatively, please call the NiTEC team on 0845 224 3571, email info@nitec-enp.co.uk or get in touch via our contact page.

Electroless Nickel Plating for Valve Components in Engineering Applications

We recently published a blog post regarding the use of electroless nickel for valves and flow control devices in the oil and gas industry. Although electroless nickel has been used successfully on ball valves in the oil and gas industry, it has been equally successful on valve components in other engineering applications too.

It is essential that valves can be opened and closed easily and reliably whenever necessary, even though no movement from a set position may have occurred over a long period of time. Protection of the stems from corrosion and abrasion can be achieved by coating with electroless nickel.

Electroless Nickel Coatings for Fire-Flow Valves

Butterfly valveElectroless nickel coatings have also been beneficial in the manufacture and performance of fire-flow valves due to their corrosion resistance, hardness, surface finish and lubricity. Fire-flow valves are required to provide a tight seal during normal operations and to act as shut off valves after inadvertent exposure to 650C.

Electroless nickel is also used on some critical safety valve applications. For example, blowout preventers are safety valves used to shut down oil and gas wells in emergency situations. A unit consists of a hydraulically operated ram, capable of cutting through the tubing carrying the oil and gas to seal the flow.

After testing, a unit is only required to operate once in an emergency but to ensure satisfactory performance, it is mandatory that no corrosion or physical damage occurs on the ram or sealing surfaces. Electroless nickel coatings are frequently used to provide the hardness and corrosion resistance required.

Corrosion Resistant Oil and Gas Coatings

NiTEC UK provide a range of metal finishing and metal plating services for both onshore and offshore oil and gas applications. For more information about corrosion resistant coatings, please call NiTEC UK on 0845 224 3571 or email info@nitec-enp.co.uk

Electroless Nickel Plating for the Oil and Gas Industry

Electroless nickel plating has been a popular coating choice in the oil and gas industry for a number of years. It is used in a wide variety of applications within the industry mainly due to its uniform, thick deposit and superior corrosion resistance.

Many base materials that are typically used in the oil and gas industry are greatly enhanced by the application of electroless nickel, resulting in lower fabrication costs and extended service life. Shutdowns and delays in the oil and gas industry are very common because of the need to replace components, but as electroless nickel substantial extends the life of parts and components, a huge amount of money can be saved.

Electroless Nickel on Valves, Flow Control Devices and Ball Plugs

electroless nickel plated valve ballsElectroless nickel coatings are often used on valves and flow control devices due to their uniform thickness, wear resistance and corrosion resistance. These parts are critical components in the operation of a well where good performance and long life are major economic factors. The coating also provides an excellent surface condition for ball plugs and improves the sealing at the seat areas. It’s now very common for mild steel ball valves to be coated with a layer of electroless nickel.

Applications of Electroless Nickel

There are lots of areas within the oil and gas industry where the application of electroless nickel has been successful. For example, in crude oil production at a plant in the Middle East where the gas contains 55% hydrogen sulphide and is processed at 80C, mild steel ball valves had a maximum life of three months, with failure occurring as a result of corrosion, surface cracking and erosion. However, by electroless nickel plating the valve components, their lives were extended and no surface deterioration was evident after two years of continuous service.

Similar benefits have been noted on ball valves at plants using the sea water injection system, which involves pumping sea water under high pressure in order to force the oil to the surface. At the Ghawar oil field in Saudi Arabia, 75 microns of electroless nickel on the valves had satisfactorily withstood the operating conditions to such an extent that no degradation of the coating was detectable after four years of operation.

Electroless Nickel Plating for Oil and Gas Applications

NiTEC UK provide a range of metal finishing and metal plating services for both onshore and offshore oil and gas applications. For more information about corrosion resistant coatings, please call NiTEC UK on 0845 224 3571 or email info@nitec-enp.co.uk

The Use of Electroless Nickel in Valves and Flow Control Devices

Electroless nickel is an excellent choice of surface technology for the oil and gas industry. As discussed in previous blog posts, the properties of elctroless nickel coatings are highly sought after in the industry, including corrosion resistance, uniformity of deposits and abrasion resistance.

Electroless Nickel and Mild Steel Ball Valves

electroless nickel plated valve ballsThese properties have resulted in the widespread use of electroless nickel coatings in valves and flow control devices, which are critical components in the operation of a well where good performance and long life are major economic factors.

The application of electroless nickel to mild steel ball valves is now typical in the oil and gas industry, replacing hard chromium as a corrosion resistant, smooth and uniform coating.

Successful applications of electroless nickel have been observed in all areas of the oil and gas industry. In crude oil production, mild steel ball valves have a maximum life of no more than three months, and fail due to corrosion, surface cracking and erosion. But valve components plated with electroless nickel last for years with no surface deterioration.

Similar benefits have also been observed on ball valves at plants using the sea water injection system which involves pumping sea water under high pressure to force oil to the surface. With a coating of electroless nickel, the valves withstand the conditions and no degradation is detectable after years of operation.

Electroless Nickel Plating Services

For more information about electroless nickel plating and its use in the oil and gas industry, or to make an enquiry about using electroless nickel for this type of application, call NiTEC UK on 0845 224 3571 or email info@nitec-enp.co.uk

Electroless Nickel Plating and It’s Use in the Oil and Gas Industry

Electroless nickel coatings can be used in a wide range of industries, including oil and gas. The properties of most value to the oil and gas industries are generally the uniformity of the thickness of the deposit, the excellent corrosion resistance that it provides, and its properties of abrasion and erosion resistance.

Enhancing Oil and Gas Base Materials with Electroless Nickel

The base materials that are traditionally used in the oil and gas industry have been enhanced by the application of electroless nickel coatings. Not only does electroless nickel lower the fabrication costs of many parts, it also extends the surface life of components. Extending the service of parts used in this industry is incredibly valuable, as the cost of shutdowns can be very expensive and time consuming.

The Three Areas in the Oil and Gas Industry

offshore oilrig

Operations in the oil and gas industry can be divided into 3 main areas; surface operations, subsurface operations or downhole operations, and offshore operations. Equipment is often exposed to severe environmental conditions including chlorides, carbon dioxide, brines, hydrogen sulphide, sea water and reef water, which can contain high levels of sulphur compounds.

In addition to this type of exposure, equipment may be exposed to abrasion problems associated with the ingestion of sand, mud, and very high temperatures.

Typical components whose performance has been enhanced by electroless nickel include the following:

Surface Operations

  • Blowout preventors
  • brake assemblies
  • chokes
  • compressors
  • gas turbines
  • pump housings
  • pumps
  • connection manifolds
  • valves

Subsurface Operations or Downhole Operations

  • Couplings
  • logging tools
  • plungers
  • packers
  • pumps
  • safety valve units
  • tubing

Offshore Operations

  • blowout preventors
  • gas turbines/compressors
  • heat exchangers
  • pumps
  • riser connectors
  • valves

UK Based Electroless Nickel Plating Factory

Here at NiTEC UK, we are experts in the process of electroless nickel plating. Our Chesterfield, UK based electroless nickel plating factory has a total of 7 nickel plating lines, making us one of the largest in Europe with the capacity to plate items of all sizes, no matter how small or large.

To find out more about NiTEC UK, electroless nickel plating, and our ability to plate equipments and components for use in the oil and gas industry, contact us today on 0845 224 3571 or email info@nitec-enp.co.uk

Electroless Nickel – Every Engineer’s Dream!

Here at NiTEC, we are extremely proud of our high quality electroless nickel plating services. We routinely nickel plate items for a wide and wonderful variety of applications and industries. This method of plating has so many advantages – which is why we like to call it every engineers dream!

What’s so Great About Electroless Nickel?

Electroless nickel coatings are comprised of a mixture of nickel alloy and phosphorus. This superb combination offers high levels of corrosion protection that are particularly useful in extreme conditions.

Electroless nickel is the perfect metal coating for working to close tolerances, meaning that post-plate grinding is rarely needed. It can be applied to a variety of base materials including stainless steel, iron, steel, brass and copper.

electroless nickel plating large parts

The Advantages of Using Electroless Nickel on Large Parts

Electroless nickel plating large components is a highly efficient method of plating, and can be extremely cost effective too.

NiTEC are one of the only electroless nickel plating companies that have the capacity to process large parts. In fact, we have never been approached with a project that we couldn’t fulfil because of its size!

Our staff have even been known to construct bespoke specialist plating tanks to accommodate larger items of unusual dimensions, such as sculptures. Of course, plating large components isn’t all about the size of the plating tank; there are lots of other practical issues to consider as well.

The mass of the part is a factor that needs to be considered. The larger and heavier the part is, the more consideration needs to be taken when moving the part in and out of the plating solutions and around the shop floor. Therefore, care must be taken when thinking about the selection of cranes and fixtures needed to lift the component.

Luckily, here at NiTEC, we have plenty of experience handling large parts, and the equipment and man power we need to do so. If you would like to find out more about the process of electroless nickel plating call us on 0845 224 3571, email us at info@nitec-enp.co.uk or visit the contact page on our website to make an enquiry.

Common Applications of Electroless Nickel Plating

nickel-coating-for-aerospace-industry

Electroless nickel coatings can be used in a wide variety of common applications. The superior corrosion resistance, hardness levels and wear resistance make it a very versatile coating.

Aerospace

Electroless nickel coatings have the perfect properties for use in the aerospace industry, for example, they can be used in the protection of hydraulic control systems.

Nickel coatings can also be used for the refurbishment and the recovery of worn machined parts. They can also be used to correct incorrectly machined parts enabling the component to be used.

Electrical and Electronics

Nickel coatings are used for electrical and electronic applications due to their ability to protect the components successfully. For example, electroless nickel coatings may be used for electrical connectors and hard drive computer components in order to impart corrosion protection and wear resistance. They are also useful for providing solderability and a non-porous barrier layer, and to otherwise enhance the performance or useful life of a particular component.

Automotive

The automotive industry has specified electroless nickel plating on brake, transmission and steering assembly components, in addition to other parts. Electroless components enhance performance, and with longer lasting parts, they can help automakers to extend their product warranties.

The energy industry

Electroless nickel coatings can be used for chemical and wear resistance to equipment in the oil and gas industry. It is also useful for coalfield cutting tools, as it provides a wear resistant coating that doesn’t carry the risk of sparking.

General engineering

Electroless nickel plating can be used in a wide variety of applications within general engineering. For example, it can be used for wear resistance in plastics and textile handling equipment, corrosion resistance in chemical handling plants, appearance, and wear resistance in automotive applications.

If you are looking for a metal coating that is suitable for a variety of applications and industries, electroless nickel is the perfect solution. Call us on 0845 224 3571, email us at info@nitec-enp.co.uk or visit the contact page on our website to make an enquiry.

 

Common Applications of Electroless Nickel Coatings

Electroless nickel plating can be applied to a variety of components. Its fantastic properties make it the perfect plating solution for a variety of applications, including the following:

Electroless nickel hard driveElectrical equipment

Electroless nickel coatings are perfect for electrical equipment due to their solderability and conductivity properties.

Applications include heat sinks, computer drive mechanisms, memory disks and drums, terminals and lead wires, chassis, connectors, diode and transistor cans, interlocks, junction fittings and printed circuit boards.

Packaging and handling machinery

Packaging and handling machinery can benefit from an electroless nickel coating due to its properties of wear resistance, cleanliness and the attractive finish it provides.

Chemical equipment

Nickel coatings have excellent chemical resistance, making them perfect for applications in the chemical and petroleum industries. This includes ball, gate and plug valves, chokes and control valves, oil field tools, oil well tubing and pumps, drilling mud pumps and blowout preventors.

Molds and dies

Electroless nickel coatings are used for molds and dies due to the lubricity of nickel that minimises erosion and abrasion. This coating is commonly used on zinc die cast dies, glass molds, plastic injection molds, and plastic extrusion dies.

Food service equipment

Electroless nickel is commonly used to plate food service equipment due to its superior corrosion and wear resistance, its an attractive finish and high degree of cleanliness.

Salvage

Electroless nickel coatings can be used for restoring parts to their original dimensions, for example, molds, shafts, landing gear and gears. They can also be used to repair mis-matched parts as they are a cost effective alternative to hard chrome and often eliminate subsequent machining or grinding operations.

If you are looking for a metal coating that provides high levels of corrosion resistance, lubricity and wear resistance, call the NiTEC team on 0845 224 3571, email info@nitec-enp.co.uk or get in touch via our contact page.