Electroless Nickel Plating a Vacuum Chamber

Here at us, we are often approached by companies with specific plating needs for bespoke applications. We were approached by Rutherford Appleton Laboratories, who had manufactured a large vacuum chamber that they wanted plating with a thin layer of electroless nickel.

Without plating, the iron from the walls of the chamber would compromise and possible affect the results of the tests carried out inside it. Lasers used during testing would also cause damage to the chamber walls without a layer of electroless nickel.

The facilities at Rutherford Appleton Laboratories are used by scientists and engineers in order to advance their research into materials and structures, light sources, astronomy and particle physics. Every year about 10,000 scientists and engineers use the Laboratory’s facilities to advance their research. Many are academics and post-graduate students working on projects funded by the Science and Technology Facilities Council.

Electroless nickel plated layer for protection

Rutherford Appleton Laboratories had manufactured the large vacuum chamber for tests that involved lasers travelling down the centre of the chamber. This area needed to be plated with a layer of electroless nickel so that the layers did not burn through the paint during testing.

The vacuum chamber came in a number of large sections, some which weighed more than 20 tonnes. The team at us manufactured tanks to fit each part of the chamber that needed to be plated. The main body of the chamber weighed 150 tonnes and was built like a small room, containing many windows, portals and doors.

Blanking plates were manufactured for each of the chamber components, and the chamber was then sheeted over and manually and internally shot blasted. Originally, the chamber was going to be used as the plating tank and filled with electroless nickel plating solution. But the portals and windows contained recesses which were identified as gas traps and to overcome this and ensure complete coverage of the electroless nickel plating, all of the blanking plates were fitted with small air pipes. These fed up the outside of the chamber and back into the top, removing gas and solution and ensuring complete coverage.

If you would like to find out more about our electroless nickel plating services call us on our phone number, email us at info@metal-finishing-company.co.uk or visit the contact page on our website to make an enquiry.