Archive for October 18, 2013

Nickel PTFE Self Lubricating Corrosion Resistant Coating

Nickel PTFE has natural self lubricating properties, which eliminate the need for liquid lubricants on components. The coating is not only slippery; it also has low sliding wear.

Nickel PTFE – Lubricity and Wear Resistance

Lubricity plays an important part in optimising wear resistance because it inhibits contact between the mating surfaces, reducing friction between them and therefore reducing heat which may be generated.

This self lubrication reduces the wear of nickel plated components through friction, therefore creating minimal coating weight loss. Due to nickel’s self lubrication, friction between parts is significantly reduced.

We have customers in the automotive, aerospace and oil and gas industries that all use Nickel PTFE as their choice of durable, dry lubrication and anti-galling coating.

Reduce friction between components

Reduced friction between nickel plated components reduces heat generation and reduces the formation of wear particles. Reduced friction also improves efficiency.

Protect against wear with dry lubrication

The self lubricating properties of a nickel PTFE coating also prevents wear because the moving parts are kept apart.

What can nickel PTFE be used on?

  • Valve seats and pump bearings
  • Connectors
  • Fasteners
  • Circuit breakers
  • Mould tools
  • Machine tools
  • Spindles
  • Clutches and splines
  • Cylinder liners
  • Medical moulds

If you are looking for a nickel coating that is self lubricating, corrosion resistant and wear resistant, Ni-PTFE is the perfect solution. Call us on 0845 224 3571, email us at info@nitec-enp.co.uk or visit the contact page on our website to make an enquiry.

Spoon Covered Gorilla for Uri Geller’s Garden

Electroless nickel plating company NiTEC were once approached by the British artist and sculptor David Mach to nickel plate a gorilla made from twisted wire coat hangers.

It seems that Uri Geller has a similar affection for gorilla shaped sculptures, as BBC news recently reported that the famous psychic and illusionist has ordered a gorilla made of spoons for his garden!

Geller has commissioned the sculpture from the British Ironwork Centre in Oswestry, and plans to put the 12ft gorilla in his Berkshire garden.

Uri Geller orders a spoon covered gorilla for his garden

The British Ironwork Centre is hoping that the public will help with donations of spoons, as a massive 5,000 are needed to complete the piece.

The entertainer, who already has a Cadillac covered in spoons in his garden, told BBC News “I plan to fly it to my house in a large cage hanging from a helicopter.”

Geller opens his garden to charity 5 times a year, and says that he chose the gorilla sculpture because he already owns paintings by a chimpanzee!

Electroless nickel plated gorilla by David MachDavid Mach choose to have his gorilla sculpture electroless nickel plated to guarantee that all the recesses formed by the coat hangers were thoroughly accessed and covered with electroless nickel.

For more information about the advantages of using electroless nickel plating to prevent corrosion and wear on sculptures, contact NiTEC UK on 0845 224 3571 or email: info@nitec-enp.co.uk

Coatings for Sub-Sea and Pipeline Applications

As specialists in the electroless nickel plating process, Nitec have worked tirelessly on developing the latest technology in marine coatings.

Corrosion resistant coating suitable for use on oil rigs and sub-sea applicationsOil and gas components are inevitably exposed to harsh environments, both under the sea and underground. This exposure to such extreme levels of temperature, moisture and pressure can have a detrimental effect on these components in a short space of time.

That is why SeaTEC 100, NiTEC’s very own development in the industry, is the perfect solution for corrosion protection and corrosion prevention in sub-sea environments. SeaTEC effectively coats valves, pumps and pipe fittings to ensure that they remain intact and in operation for an unprecedented amount of time in the industry.

Diffused Nickel Plating

The simple process of diffused nickel plating is the most effective nickel coating to ensure the highest levels of corrosion resistance via the total encapsulation method of plating. Diffused nickel plating is proven to be more corrosion resistant than even the highest grade stainless steel, and much cheaper.

Diffused nickel plating is so resistant to corrosion, particularly in marine environments, that our customers give mild steel plated in this way 30 year sub-sea guarantees.The diffused nickel plating process has been extensively used in the end-fittings for flexible pipe lines and top-side equipment. When independent salt spray testing was carried out on diffused nickel plated components, the experiment was abandoned after 2000 hours because no corrosion could be detected.

If you are looking for a solution to marine corrosion, and would like to find out more about SeaTEC 100, the ultimate in marine corrosion prevention, 0845 224 3571 or email: info@nitec-enp.co.uk

High Phosphorus Electroless Nickel Coatings

High phosphorus electroless nickel provides the highest levels of corrosion resistance. It is often used in industries that require high levels of resistance to strongly acidic corrosive environments, for example, coal mining and oil drilling.

Component plated with high phosphorus electroless nickelElectroless nickel containing high levels of phosphorus has a low degree of solderability, and will only be solderable for a limited time after plating. This makes it perfect for electronic parts such as connector housings and semiconductor packaging.

The microhardness levels of high phosphorus electroless nickel coatings range up about 600 VPN. This type of nickel coating makes for low levels of surface porosity, and is not prone to staining.

Also, when the phosphorus content is greater than 11.2%, deposits are non-magnetic.

Features of high phosphorus electroless nickel:

  • Corrosion resistant
  • Fast deposition rate throughout life
  • Consistent deposition rate throughout life
  • Very stable and robust

If you are looking for a metal coating that provides high levels of corrosion resistance, high phosphorus electroless nickel is a great solution. Call the NiTEC team on 0845 224 3571, email info@nitec-enp.co.uk or get in touch via our contact page.

NiTEC sponsor Tupton RUFC

We’ve got a great team here at NiTEC. As well as working hard electroless nickel plating and all the other types of metal finishing services we carry out, we’ve also got 6 members staff on a local rugby team, Tupton RUFC.

NiTEC electroless nickel plating sponsor Tupton RUFC

 

NiTEC sponsor the team with hats and training tops, and obviously, we also provide them with loads of support whether they win or lose!

If you are looking for a quality, reliable metal plating company, who are also dab hands on the rugby pitch, contact NiTEC on 0845 224 3571 or email: info@nitec-enp.co.uk

Features of Electroless Nickel PTFE Coatings

Nickel-PTFE combines the engineering properties of nickel with the lubricity of polytetrafluoroethylene.

Just like standard electroless nickel, the Nickel PTFE deposit occurs as a result of an autocatalytic chemical reaction which allows a reliable, repeatable coating of uniform thickness. This coating makes it possible to coat parts with sharp edges, seams, threads, deep recesses and complex shapes.

During the plating process, the PTFE particles become embedded throughout the deposit of nickel. The unique composite of Nickel PTFE allows for renewed polytetrafluoroethylene at the surface of the component, even as the coating wears. The chemical process involved in the production of Ni-PTFE coatings means that the PTFE is uniformly dispersed throughout the nickel deposit in order to ensure optimum performance in high friction and non-lubricated applications.

Features of Nickel PTFE Coatings

  • Long life lubrication
  • Dry lubrication, reducing sticking and galling
  • Good mold release, eliminating spray releases
  • Hydrophobic
  • Uniform coverage, particularly good for complex shapes
  • Can be heat treated for increased hardness
  • Good for hign friction applications
  • Natural lubricity eliminating the need for standard lubrication
  • Moving parts such as slides and bearings work with improved efficiency and quieter operation

If you are looking for a nickel coating that combines the lubricity of polytetrafluoroethylene with the hardness and corrosion resistance of electroless nickel, NiTEC can help. Call us on 0845 224 3571, email us at info@nitec-enp.co.uk or visit the contact page on our website to make an enquiry.