Archive for Marine coatings

|
Comments Off on The Gold Plated Apple

The Gold Plated Apple

Apple watch for gold plating

Apple watches which have been gold plated tend to cost a minimum of $10,000 if you buy directly from Apple, for the 18 carat gold edition.  So instead there is now the option to purchase a DIY kit for $100 which also entails a step by step guide to this cheap solution to gold plating yourself with 24 carat gold.  This is a much more cost effective option than sending your Apple watch back to Apple to do it for you which costs at least $400.  There are also other benefits from the DIY set – for example, you can touch up gold plated areas once they begin to fade or show signs or wear and this can be done at your convenience, too.

Plating

If you are wanting a product plated then there are lots of different options for you to mull over.  These include electroless nickel plating, diffused nickel plating, copper plating, tin plating, nickel boron plating and nickel diamond plating to name but a few.

The Pros of Plating

  • Improves the quality of your components
  • Improve the surface
  • Protects the component from wear
  • Increases the levels of hardness
  • Induces self-lubrication
  • Reduces the wear of a friction in a component
  • No chipping or flaking like with other top coats like paints of lacquers
  • Lower porosity
  • Non-magnetic
  • Less prone to staining
  • Pit-free deposits
  • Hard deposits
  • Very uniform thickness
  • Excellent corrosion protection
  • Doesn’t have to be extortionately expensive
  • Marine corrosion resistant (DNP)
  • Sub-sea protection (DNP)
  • Salt spray resistant (DNP)
  • Protects ferrous and non-ferrous surfaces (TP)
  • Increases performance (TP)
  • Increases durability (TP)
  • Non-toxic (TP)
  • Resistant to fretting (NBP)
  • Resistant to galling (NBP)
  • Resistant to abrasion (NBP)
  • Ductile (NBP)
  • Solderability (NBP)
  • Performs well at high temperatures (NBP)
  • Increased thermal transfer (NDP)
  • Conformity to complex geometry (NDP)
  • Can be applied to all common metals and alloys (NDP)
  • Can cover entire surfaces of specific targeted areas (NDP)
  • Are used by a number of industries, such as power, telecommunications, medical, marine, army, aerospace, motor, etc.

Plating Specialists

us are leading specialists in the plating industry.  Based in Derbyshire, England, we specialise in electroless nickel plating but offer a wide range of other techniques too.  Our aim is to provide a high-end but cost effective service for you.  We have extensive experience working in a great number of sectors including the automotive, aerospace and military industries and are proud that we can offer our services to the entirety of the UK, France, Holland, Brazil and Germany.

Contact us Today

If you are interest in finding out more about electroless nickel plating, diffused nickel plating, copper plating, tin plating, nickel boron plating or nickel diamond plating, then why not call us today  on our phone number or alternatively you can email our staff at us at   We look forward to hearing from you!

Category: Marine coatings, Metal coatings, Metal finishing, plating | Tags: , ,
|
Comments Off on Coatings for Sub-Sea and Pipeline Applications

Coatings for Sub-Sea and Pipeline Applications

As specialists in the electroless nickel plating process, us have worked tirelessly on developing the latest technology in marine coatings.

Oil and gas components are inevitably exposed to harsh environments, both under the sea and underground. This exposure to such extreme levels of temperature, moisture and pressure can have a detrimental effect on these components in a short space of time.

That is why SeaTEC 100, us’s very own development in the industry, is the perfect solution for corrosion protection and corrosion prevention in sub-sea environments. SeaTEC effectively coats valves, pumps and pipe fittings to ensure that they remain intact and in operation for an unprecedented amount of time in the industry.

Diffused Nickel Plating

The simple process of diffused nickel plating is the most effective nickel coating to ensure the highest levels of corrosion resistance via the total encapsulation method of plating. Diffused nickel plating is proven to be more corrosion resistant than even the highest grade stainless steel, and much cheaper.

Diffused nickel plating is so resistant to corrosion, particularly in marine environments, that our customers give mild steel plated in this way 30 year sub-sea guarantees.The diffused nickel plating process has been extensively used in the end-fittings for flexible pipe lines and top-side equipment. When independent salt spray testing was carried out on diffused nickel plated components, the experiment was abandoned after 2000 hours because no corrosion could be detected.

If you are looking for a solution to marine corrosion, and would like to find out more about SeaTEC 100, the ultimate in marine corrosion prevention, our phone number or email: 

Category: Marine coatings, Marine corrosion resistance | Tags: , , , , , ,
|
Comments Off on us’s Marine Coating Technology

us’s Marine Coating Technology

us’s very own marine corrosion prevention technology, SeaTEC 100, is the ultimate solution to increasing the life of components used in subsea conditions.

SeaTEC 100’s superior marine corrosion resistance means that mild steel is protected from salt spray corrosion and marine corrosion for extensive periods of time, making it perfect for use on offshore platforms such as oil rigs.

Marine Corrosion Protection

SeaTEC 100 is an extremely cost effective coating.

Because it extends the life of materials in marine environments, such as mild steel, the downtime that would usually be caused by repair or replacement of corroded parts is reduced, or even avoided altogether.

This makes SeaTEC 100 an ideal plating for oil rigs and pipes used to transport oil and gas.

Features of SeaTEC 100

  • Effectively plates metal components, valves and connectors, making SeaTEC 100 a cost-effective way of extending the life of mild-steel operating in marine environments, the ultimate in marine corrosion prevention.
  • Effectively increases the strength of items such as pipeline connectors, where the material is at it’s weakest level.
  • SeaTEC 100 has been independently tested to withstand salt spray conditions and protect against marine corrosion for over 25,000 hours, a period of time that is unprecedented within the metal plating industry.
  • It is available in a range of colours.

If you are looking for a solution to marine corrosion, and would like to find out more about SeaTEC 100, the ultimate in marine corrosion prevention, our phone number or email: 

Category: Marine coatings, Marine corrosion resistance | Tags: , , , ,
|
Comments Off on UK Industrial Output Increased by Rise in Oil and Gas Extraction

UK Industrial Output Increased by Rise in Oil and Gas Extraction

 

The UK’s industrial sector has received a significant boost thanks to an increased output of oil, gas and manufacturing. The Yorkshire Post has reported that industrial output grew at its fastest rate in six months in March, after an unexpected bounce in oil and gas extraction.

Official data from the Office for National Statistics has showed that industrial output rose 0.5% in March, after creeping up by only 0.1% in February. This is the strongest growth since September, and has exceeded leading economists’ forecast of that it would remain the same.

Oil and Gas Extraction

Oil and gas extraction rose to 4.9%, which was its fastest rate since February 2019. Falling oil prices and rising production costs as North Sea oil gets scarcer had previously contributed to a general downward trend.

Britain’s economy grew by 2.8% in 2019, the fastest growth rate of any big advanced economy. It did lose pace in the first quarter of 2019 when total output rose by just 0.3%. However, recent data shows that manufacturing output rose by 0.4% after upwardly revised growth of 0.5% in February, which was slightly faster than expected.

Marine Corrosion Protection for the Oil and Gas Industry

Here at us, we carry out a significant amount of metal plating work for parts and components to be used in the oil and gas industries. A common requirement for plated components used in these industries is their ability to resist corrosion for a substantial amount of time, especially in subsea conditions.

Our commitment to research and development allowed us to create SeaTEC100, a metal coating that protects mild steel from salt spray corrosion and marine corrosion for an extensive period of time. SeaTEC 100 has been independently tested to withstand salt spray conditions for over 25,000 hours, a period of time that is unprecedented within the engineering industry.

Metal Plating for Oil and Gas Applications

We provide a range of metal finishing and metal plating services for both onshore and offshore oil and gas applications. For more information about corrosion resistant coatings, please call us or email

Category: Marine coatings, Marine corrosion resistance | Tags: , , , , , , ,
|
Comments Off on Underwater Corrosion Protection for the Oil and Gas Industry

Underwater Corrosion Protection for the Oil and Gas Industry

As experts in coatings that provide high levels of underwater corrosion resistance, our services are used for a variety of applications in the oil and gas industry. Components and parts used in such industries are exposed to extremely harsh and demanding environments. As such, corrosion problems occur related to sea water, aggressive chemicals, galling and seizure of threads and wear protection.

Industry Leaders in Metal Coatings for Oil and Gas

Here at us, we are industry leaders in metal coatings that provide underwater corrosion protection for the oil and gas industry. We have extensive expertise in characterising and understanding the process of wear and corrosion, so that we can work with our customers to ensure that the most effective metal coating solution is identified and carried out.

Salt Spray Testing

We also have our very own laboratory on site that specialises in salt spray testing, which can effectively assess the reliability of a product by simulating these environments, therefore ensuring that the coating will survive in the environment it is intended for. The standard salt spray test method is used to check the corrosion resistance of coated samples, substrates, and components which may be prone to suffering from degradation as a result of salt corrosion. We have the facilities to carry out salt spray testing to the specification of ASTM B117.

Marine Corrosion Protection Coating

Our product SeaTEC 100 is an industry leading product that protects mild steel from salt spray corrosion and marine corrosion for an extensive period of time. The coating is ideal for use in sub-sea conditions and can be used to increase the longevity of components used in subsea conditions. SeaTEC 100 effectively increases the strength of items such as pipeline connectors, where the material is at its weakest level, and has been independently tested to withstand salt spray conditions for over 25,000 hours, a period of time that is unprecedented within this industry. It effectively plates metal components, valves and connectors, making SeaTEC100 a cost-effective way of extending the life of mild-steel operating in marine environments.

SeaTEC 100 Marine Corrosion Protection

For more information about underwater corrosion resistance SeaTEC 100 and its ability to extend the life of parts exposed to subsea conditions, please contact the expert team at us by calling our phone number or email us at .

Category: Corrosion protection, Corrosion resistant coating, Marine coatings, Marine corrosion resistance, Oil and gas, Salt spray testing | Tags: , , , , ,
|
Comments Off on Jobs Growth for UK Oil and Gas Sector

Jobs Growth for UK Oil and Gas Sector

BBC News has recently reported that companies in the oil and gas sector in the UK expect to create nearly 40,000 jobs in the next two years. According to a survey commissioned by the Bank of Scotland of 100 UK companies, the expectations of employment growth has increased this year, with 69% of company executives being optimistic about their prospects for growth in 2019 and 2019.

International Expansion and Investment

The companies involved in the study also expressed that international expansion was a priority, with 64% of them already planning further growth in foreign markets in the next 2 years.

The research, carried out by BDRC Continental, analysed companies over a range of size, location and service type. There was also a study carried on the same topic last year, which found that companies in the oil and gas sector were expected to hire an extra 34,000 people over a period of two years.

The commercial area director of the Bank of Scotland, Stuart White, said: “The findings of this report are excellent news for the economy, demonstrating the employment-generating nature of the oil and gas industry now and in the future. With most of the UK’s oil and gas firms clustered in Aberdeen and the north-east, Scotland should reap the largest share of these new jobs, however other parts of the UK will benefit from expansion plans.

“The results also demonstrate the global nature of the industry as more firms look to expand internationally and tap into the markets with the largest levels of recoverable reserves,” he explained. “With 44% of income already generated internationally, this is not a new trend, and reflects the reach UK firms have as the industry benefits from the expertise gained in the challenging North Sea environment.”

Marine Corrosion Protect for the Oil and Gas Industry

Here at us, our metal plating and metal finishing service are often employed on components used in the oil and gas sector. We regularly deal with parts such as end fittings and flexible pipelines, among others. In addition to electroless nickel plating and diffused nickel plating which provide excellent corrosion resistance, we have also developed our very own SeaTEC100, the ultimate in marine corrosion resistance. This specialist surface increases the life of components used in subsea conditions and effectively protects mild steel from salt spray corrosion and marine corrosion for an extensive period of time.

If you are looking for a metal coating that provides high levels of corrosion resistance for use in the oil and gas industries, call the us team , email  or get in touch via our contact page.

Category: Marine coatings, Marine corrosion resistance, Oil and gas | Tags: , , , , , , , ,
|
Comments Off on Corrosion Resistant Coatings for Marine Environments

Corrosion Resistant Coatings for Marine Environments

Mining equipment suffering from rust and corrosion

Corrosion can be a big problem for parts and machinery operating in marine environments. Mild steel is commonly used for marine applications due to its strength, ease of fabrication and relatively cheap price.

The only problem is, it corrodes very easily when exposed to seawater. So when mild steel isn’t protected by a corrosion resistant layer or barrier, it quickly loses its strength and can, therefore, result in failure of parts.

What is Corrosion?

Corrosion is the gradual destruction of materials by chemical reaction with their environment. It is the oxidisation of the metal at the interface between the metal and the environment, and the reaction results in the degradation of the mechanical properties of the metal. Corrosion is dependent on many factors, including oxygen concentration, pH, water temperature and the presence of dissolved salts such as chloride, sulphate and sulphites.

Pitting Corrosion

Pitting corrosion is a type of corrosion that occurs on mild steel in a localised fashion. The steel penetration can be very deep in relation to the area under attack, and it is therefore one of the most dangerous types of corrosion.

Bacterial Corrosion

Bacterial corrosion can also be referred to as micro-biological corrosion or anaerobic (without oxygen) corrosion. This type of corrosion is likely to happen if the environment that the metal is exposed to supports bacterial activity. For bacterial corrosion to occur, there must be stagnant water, a hydrocarbon food source e.g. oil or coatings, the presence of sulphates, an operating temperature of between 20 – 40C, and the presence of bacteria.

Corrosion Prevention Using Metal Coatings

The prevention of corrosion requires the elimination or suppression of the chemical reaction between the environment and the metal. One way of preventing this reaction is by applying a metal coating to the surface of the substrate, and the effectiveness of the coating depends on factors including the type of coating used, the operating environment and the coating type.

SeaTEC 100 Marine Corrosion Protection

Here at us, we have developed a corrosion resistant metal coating that effectively protects mild steel from salt spray corrosion and marine corrosion for an extensive period of time. For more information about SeaTEC 100 and its ability to extend the life of parts exposed to subsea conditions, please contact the expert team at us by calling our phone number or email us at .

Category: Corrosion protection, Corrosion resistant coating, Marine coatings, Marine corrosion resistance | Tags: , , , , , ,
|
Comments Off on Long Lasting Oil and Gas Components for Subsea Applications

Long Lasting Oil and Gas Components for Subsea Applications

Oil and gas components are exposed to harsh environments, both under the sea and underground. This exposure to such extreme levels of temperature, moisture and pressure can have a detrimental effect on these components in a short space of time.

Corrosion protection in Sub-Sea Environments

As specialists in the electroless nickel plating process, us have worked tirelessly on developing the latest technology in corrosion resistant marine coatings.

 

Our specialists have developed and tested this revolutionary product, and we consider the coating to be a market leader within our industry.

SeaTEC 100 is our very own development and the perfect solution for corrosion protection and corrosion prevention in sub-sea environments. Not only will it protect mild steel from salt spray corrosion and marine corrosion for an unprecedented amount of time, SeaTEC effectively coats valves, pumps and pipe fittings to ensure that they remain intact and in operation.

Features of SeaTEC 100 Marine Corrosion Resistance

SeaTEC 100 effectively plates metal components, valves and connectors, making it a very cost effective way of extending the life of mild steel operating in subsea, marine environments.

This coating is great for increasing the strength of components. Materials tend to be at their weakest levels in areas where they have joins; therefore, components such as pipeline connectors are often vulnerable to corrosion. Corrosion at vital points such as these can mean failure of a system, so their longevity is essential to the overall lifespan of the system as a whole.

The Ideal Plating for Oil Rigs and Gas Pipes

SeaTEC 100 has also been through an extensive, independent testing process which has confirmed that the coating can withstand salt spray conditions for over 25,000 hours. This period of time is actually unprecedented in the industry, making SeaTEC100 a leading coating. This ability to extend the life of materials such as mild steel in marine environments means the downtime as a result of corroded parts is reduced or eliminated, saving money and time.

If you are looking for a metal coating that provides high levels of corrosion resistance for use in the oil or gas industries, call the us team , email  or get in touch via our contact page.

Category: Marine coatings, Marine corrosion resistance | Tags: , , , , , , , ,